ELECTRIC MOTOR ACTUATOR; 140 IN-LB/16NM;24 VAC/ VDC;PROP; 0-10 VDC/ 0-20 MA;W/ZERO-SPAN;2 AUX SW
The M9116-GGx-2 and M9116-HGx-2 Series direct-mount electric actuators operate on 24 VAC or VDC power. These actuators are available for use with proportional controllers. These bidirectional actuators do not require a damper linkage, and are easily installed on a damper with a round shaft up to 3/4 in. (19 mm) in diameter or a square shaft up to 5/8 in. (16 mm). They may be direct or remote mounted to a damper or mounted to a valve using one of the M9000-5xx Valve Linkage Kits. A single M9116-GGx-2 or M9116-HGx-2 model delivers 140 lb°in (16 N°m) of torque. Two HGx models in tandem deliver twice the torque, 280 lb°in (32 N°m). The angle of rotation is mechanically adjustable from 0 to 90° in 5-degree increments. Integral auxiliary switches are available to indicate end-stop position or to perform switching functions at any angle within the selected rotation range. Jumpers on the actuator allow users to select the direction of action, range of control input, and calibration (fixed or adjustable). Position feedback is available through a 0 to 10 VDC signal.
Installation Instructions: M9108, M9116, M9124, and M9132 Series Electric Non-spring Return Actuators Installation Instructions