CMC-1001

Controller: Positioner, Plastic :- The KMC CMC-1001 non-metallic positive positioner is designed to work with KMC pneumatic damper actuators. CMC-1001s can be factory-mounted or field-installed on 3";, 4";, or 6"; stroke actuators. The CMC-1001 is designed to be used with actuators containing an 8 to 13 psi spring so that equal force can be obtained on both power and return strokes. The CMC-1001 replaces positioners on any MCP actuator with the digit 1 in the fifth position (MCP-xxxx-1xxx). The start-point is adjustable from 3 to 10 psi. The overall span is a direct function of the selected feedback spring, which is ordered separately (see Accessories section). NOTE: For all 3"; and 4"; actuators, insert the (included) VTD-2500 restrictor in the line between Port #1 and the actuator. The restrictor is not needed on 6"; actuators.