zoom

Product pictures shown represent the general type of component listed.The product you select might not exactly match the photo.

CSP-O-F15-001/U

$0.00
(No reviews yet) Write a Review
SKU:
CSP-O-F15-001/U
Overview All of these sensors have a solid-state output with an adjustable or fixed trip point (setpoint). These current switches should be used in applications in which a "Go/No Go" current switch is required. The current switches can be used to monitor devices with a maximum continuous operating current of up to 250 Amps. These current switches do not need to be externally powered, since the power for the switch is induced from the conductor being monitored. The split core switches are ideal for retrofit or existing installations, since it is not necessary to power down the unit and disconnect any wires during the installation process. Solid core switches are extremely easy to install, they are an excellent choice for new installations. Features Solid or split core switches with fixed or adjustable trip pointsVery low operating trip pointsLED status indicationIntegral DIN rail mounting flangeAccepts up to a 350 MCM (17.3 mm) cableOperates up to 250 continuous ampsRoHS and WEEE CompliantLimited 5 year warranty.
Weight (lb) :
0.23 lb
Weight (kg) :
0.1 kg
Frequency :
40 Hz to 1 kHz
Approvals, Underwriters Laboratories Inc. :
Approved
Operating Humidity Range (% RH) :
0 to 95% RH, non-condensing
Operating Temperature Range (F) :
5 F to 104 F
Operating Temperature Range (C) :
-15 C to 40 C
Approvals, CE :
Approved
Enclosure :
UL94-5V/Burgundy
Core Type :
Split
Normal Position :
N.O.
Output Switch Rating :
0.30 Amps @ 200 Vac/Vdc
Isolation Voltage :
2200 Vac
Trip Point :
2.50 Amps
Approvals, Environmental Compliance :
RoHS-Directive 2002/95/EC, WEEE-Directive 2002/96/EC
Max Sensing Current Voltage :
600 Vac
DIN Rail Size (in.) :
1-3/8 in.
DIN Rail Size (mm) :
35 mm
Operating Range :
0-200A

No Reviews Yet

Write a Review