ELECTRIC MOTOR ACTUATOR; 70 IN-LB/8NM; 24 VAC/VDC PROP 0-10 VDC/0-20 MA; 0-10 VDC FEEDBACK
The M9108-GGx-2 and M9108-HGx-2 Series direct-mount electric actuators operate on 24 VAC or VDC power, and are available for use with proportional controllers. These bidirectional actuators do not require a damper linkage, and are easily installed on a damper with a round shaft up to 3/4 in. (19 mm) in diameter or a square shaft up to 5/8 in. (16 mm). They may be direct or remote mounted to a damper, or mounted to a VG1000 Series ball valve using the M9000-510 Valve Linkage Kit. A single M9108-GGx-2 or M9108-HGx-2 model delivers up to 70 lb°in (8 N°m) of torque. The angle of rotation is mechanically adjustable from 0 to 90° in 5-degree increments. Integral auxiliary switches are available to indicate end-stop position or to perform switching functions at any angle within the selected rotation range. Jumpers on the actuator allow users to select the direction of action, range of control input, and calibration (fixed or adjustable). Position feedback is available through switches, a potentiometer, or a 0 to 10 VDC signal.
Installation Instructions: M9108, M9116, M9124, and M9132 Series Electric Non-spring Return Actuators Installation Instructions