ELECTRIC MOTOR ACTUATOR; 140 IN-LB/16NM; 24 VAC/VDC; ON/OFF-FLOATING; 80 SEC
The M9116-AGx-2 Series direct-mount electric actuators operate on 24 VAC or VDC power, and are available for use with on/off or floating controllers. These bidirectional actuators do not require a damper linkage, and are easily installed on a damper with a round shaft up to 3/4 in. (19 mm) in diameter or a square shaft up to 5/8 in. (16 mm). They may be direct or remote mounted to a damper or mounted to a valve using one of the M9000-5xx Valve Linkage Kits. A single M9116 model delivers up to 140 lb°in (16 N°m) of torque. The angle of rotation is mechanically adjustable from 0 to 90° in 5-degree increments. Integral auxiliary switches are available to indicate end-stop position or to perform switching functions at any angle within the selected rotation range. Position feedback is available through either a 135 or 1,000 ohm potentiometer.
Installation Instructions: M9108, M9116, M9124, and M9132 Series Electric Non-spring Return Actuators Installation Instructions