zoom

Product pictures shown represent the general type of component listed.The product you select might not exactly match the photo.

ML6421B1040

$0.00
(No reviews yet) Write a Review
SKU:
ML6421B1040
Overview The ML6421A,B Non-Spring Return Electric Linear Valve Actuators are suitable for use with low-voltage, single-pole double-throw (spdt), Series 60 two-position and floating controllers. These actuators operate standard Honeywell valves in heating, ventilating, and air conditioning (HVAC)applications. The ML7421A,B Non-Spring Return Electric Linear Valve Actuators are modulating control actuators used with control that provide an analog output of 0 to 10 Vdc or 2 to 10 Vdc. These actuators operate standard Honeywell valves in HVAC applications. An internal selector plug can be used to reverse the direction of action. Features Easy and quick installation on valves with 1 3/8 in. bonnet and 3/4 in. stroke, or with 1 7/8 in. bonnet and 1 1/2 in. stroke High force for VGF Pressure-balanced valves No separate linkage required Conduit connector standard No adjustments required on linkage Accurate valve positioning Low power consumption High close-off ratings Force limiting end switches Manual operator Synchronous motor Maintenance free
Application :
HVAC
Weight (lb) :
5.1 lb
Weight (kg) :
2.3 kg
Materials :
ABS Plastic
Item Type :
Product
Frequency :
50 Hz, 60 Hz
Approvals, Underwriters Laboratories Inc. :
Flammability Rating UL94V-5V
Approvals, Canadian Standards Association :
Certified
Electrical Connections :
Screw terminals
Operating Humidity Range (% RH) :
5 to 95% RH
Supply Voltage :
24 Vac +10%, -15%
Power Consumption :
Driving-- 11 VA
Shipping and Storage Temperature Range (F) :
-40 F to +158 F
Shipping and Storage Temperature Range (C) :
-40 C to +70 C
Approvals, CE :
Recognized
Ambient Temperature Range (F) :
14 F to 122 F
Ambient Temperature Range (C) :
-10 C to +50 C
Environmental, Electrical or Ingress Protection Rating :
IP54,Class I Insulation (24 Vac)
Internal Auxiliary Switch :
Fluid Temperature (C) :
150 C Maximum
Fluid Temperature (F) :
300 F Maximum
Actuator Type :
Valve
Control Signal :
SPDT, Two position, Floating
Fail Safe Mode :
Stays in place
Torque Rating (lb-in.) :
405 lbf
Torque Rating (Nm) :
1800 N
Switches :
Yes
Stroke (in.) :
1 1/2 in.
Stroke (mm) :
38 mm
Timing, Nominal :
Driving @ 60 Hz-- 175 sec
Manual operation :
Knob

No Reviews Yet

Write a Review