Overview
Use with C7400A, or C7660 and C7150B or C7046 Sensors; Demand Control Ventilation (DCV) sensor C7232 C02 sensor (2-10 Vdc); and Honeywell Series 72 actuators, or M7415 Damper Actuator to proportion outdoor and return air dampers for economizer and ventilation control in commercial HVAC equipment. (See below)
Features
Input from DCV C02 sensor provides optimum ventilation based on occupancy. Includes air change and shutdown.Demand control ventilation economizer provides comfort, energy savings, reliability, air quality compliance and application flexibility in heating, cooling and ventilating applications.Combines enthalpy or dry bulb changeover control, minimum and maximum damper position potentiometer and DCV setpoint functions.Optional differential enthalpy control (enthalpy setpoint D with two C7400A sensors) provides greater economizer savings and maximum comfort over single enthalpy control.Enthalpy setpoint (A-D) on economizer module controls the combination of air temperature and humidity that is suitable for free cooling.LEDs indicates when economizer is in free cooling and DCV modes.Provides for input from an outdoor air quality sensor.
- Dimensions (in.) : 8 11/16 in. high x 5 13/16 in. wide x 1 11/16 in. deep
- Dimensions (mm) : 221 mm high x 147 mm wide x 43 mm deep
- Used With : Honeywell Series 72 actuators
- Item Type : Product
- Frequency : 50 Hz, 60 Hz
- Approvals, Underwriters Laboratories Inc. : UL Listed File: E4436, Guide: XAPX, Meets UL873 plenum requirements
- Operating Humidity Range (% RH) : 5 to 95% RH, non-condensing
- Contact Ratings : 30 Vac-- 1.5 A Run, 3.5 A Inrush
- Voltage : 24 Vac
- Operating Temperature Range (F) : -25 F to +125 F
- Operating Temperature Range (C) : -32 C to +52 C
- Approvals, Others : Complies with California Title 24
- Output : 2-10 Vdc to actuator
- Use with Sensor : C7150, C7046, C7232, C7400A, C7660
- Approvals, C-Tick : Approved
