Variable Speed Drive ATV630|Wall Mount|Supply Frequency: 50...60 Hz - 5...5 %|Us Rated Supply Voltage: 380...480 V - 15...10 %|144mm W x 350mm H x 203mm D
- Brand : Schneider Electric
- By Schneider : Yes
- capacity of DC link : 235.0 µF
- Carbon footprint (kg CO2 eq, Total Life cycle) : 3335
- Communication Port Protocol : Ethernet
- Communication Port Protocol : Modbus serial
- Communication Port Protocol : Modbus TCP
- computer port : Yes
- Connector Type : RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
- Connector Type : RJ45 on the remote graphic terminal)Modbus serial
- continuous output current : 4 A 4 kHz heavy duty
- continuous output current : 5.6 A 4 kHz normal duty
- data format : 8 bits, configurable odd, even or no parity
- degree of protection : UL type 1 UL 508C
- Depth : 8.0 in (203 mm)
- design of frequency changer : U converter
- Global Keywords : ATV600
- Global Keywords : Heavy duty
- Global Keywords : Low voltage speed drive
- Global Keywords : Normal duty
- Global Keywords : Schneider
- Global Keywords : Schneider electric
- Global Keywords : Se
- Global Keywords : Speed drive
- Global Keywords : UL type 1
- Global Keywords : Variable frequency drive
- Global Keywords : Variable speed drive
- Global Keywords : Vsd for asynchronous motor
- Global Keywords : Vsd for synchronous motor
- Global warming ; Total life cycle? : 3 335 kg CO2 eq.
- Height : 13.8 in (350 mm)
- housing material : Plastic
- input compatibility : DI1...DI6 discrete input level 1 PLC IEC 61131-2
- input compatibility : DI5, DI6 discrete input level 1 PLC IEC 65A-68
- input compatibility : STOA, STOB discrete input level 1 PLC IEC 61131-2
- insulation resistance : > 1 MOhm 500 V DC for 1 minute to earth
- IP Degree of Protection : IP21
- IP Degree of Protection : IP21IEC 60529
- IP Degree of Protection : IP21IEC 61800-5-1
- isolation : Between power and control terminals
- line current : 2.9 A 480 V heavy duty)
- line current : 3.1 A 380 V heavy duty)
- line current : 3.8 A 480 V normal duty)
- Local Signalling : 1 LED (red) for presence of voltage
- Local Signalling : 3 LEDs (dual colour) for embedded communication status
- Local Signalling : 3 LEDs for local diagnostic
- Local Signalling : 4 LEDs (dual colour) for communication module status
- Manufacturer : Schneider Electric
- Marking : CE
- maximum acceleration under shock impact (during op : 150 m/s² at 11 ms
- maximum acceleration under shock load (during stor : 150 m/s² at 11 ms
- maximum acceleration under shock load (during tran : 150 m/s² at 11 ms
- maximum acceleration under vibrational stress (dur : 10 m/s² at 13...200 Hz
- maximum acceleration under vibratory load (during : 10 m/s² at 13...200 Hz
- maximum associated fuse rating : 10.0 A
- maximum deflection under vibratory load (during op : 1.5 mm at 2...13 Hz
- maximum deflection under vibratory load (during st : 1.5 mm at 2...13 Hz
- maximum deflection under vibratory load (during tr : 1.5 mm at 2...13 Hz
- Maximum Horse Power Rating : 2 hp heavy duty
- Maximum Horse Power Rating : 3 hp normal duty
- Maximum Input Current per phase : 4.3 A
- maximum output frequency : 500 kHz
- maximum output voltage : 480.0 V
- Maximum Switching Current : Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC
- Maximum Switching Current : Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC
- Maximum Switching Current : Relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC
- Maximum Switching Current : Relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC
- maximum transient current : 6 A 60 s heavy duty)
- maximum transient current : 6.2 A 60 s normal duty)
- method of access : Slave Modbus TCP
- minimum switching current : Relay output R1, R2, R3 5 mA 24 V DC
- Pollution Degree : 2
- Pollution Degree : 2 IEC 61800-5-1
- power dissipation in W : Forced convection 60 W 380 V 4 kHz
- power dissipation in W : Natural convection 30 W 380 V 4 kHz
- power loss per device current dependent : 98.0 W
- power loss static current independent : 14.0 W
- power range : 2.2-3 kW 380-440 V 3 phase
- power range : 2.2-3 kW 480-500 V 3 phase
- Product Certifications : ATEX INERIS
- Product Certifications : ATEX zone 2/22
- Product Certifications : CSA
- Product Certifications : DNV-GL
- Product Certifications : TÃœV
- Product Certifications : UL
- Product contributes to saved and avoided emissions : Yes
- Product Destination : Asynchronous motors
- Product Destination : Synchronous motors
- Product Or Component Type : Variable speed drive
- Product Specific Application : Process and utilities
- prospective line Isc : 50 kA
- Protection Type : Break on the control circuit drive
- Protection Type : Line supply overvoltage drive
- Protection Type : Line supply phase loss drive
- Protection Type : Line supply undervoltage drive
- Protection Type : Motor phase break drive
- Protection Type : Motor phase break motor
- Protection Type : Overcurrent between output phases and earth drive
- Protection Type : Overheating drive
- Protection Type : Overload of output voltage drive
- Protection Type : Overspeed drive
- Protection Type : Overvoltages on the DC bus drive
- Protection Type : Safe torque off drive
- Protection Type : Safe torque off motor
- Protection Type : Short-circuit protection drive
- Protection Type : Thermal protection drive
- Protection Type : Thermal protection motor
- Quantity Per Set : 1
- refresh time : Relay output R1, R2, R3)5 ms +/- 0.5 ms)
- Regulation Loop : Adjustable PID regulator
- Relative Humidity : 5-95 % without condensation IEC 60068-2-3
- relative symmetric mains voltage tolerance : 10 %
- relative symmetric network frequency tolerance : 5 %
- relay output number : 3
- relay output type : Configurable relay logic R1 fault relay NO/NC 100000 cycles
- relay output type : Configurable relay logic R2 sequence relay NO 100000 cycles
- relay output type : Configurable relay logic R3 sequence relay NO 100000 cycles
- Safety Function : STO (safe torque off) SIL 3
- sampling duration : 10 ms +/- 1 ms AO1) - analog output
- sampling duration : 2 ms +/- 0.5 ms DI1...DI4) - discrete input
- sampling duration : 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input
- sampling duration : 5 ms +/- 1 ms DI5, DI6) - discrete input
- SCIP Number : 4de62941-2f5a-4018-a63f-6ca03d378705
- shock resistance : 15 gn 11 ms IEC 60068-2-27
- specific application : Utility
- speed drive output frequency : 0.1-500 Hz
- Standards : IEC 13849-1
- Standards : IEC 60721-3
- Standards : IEC 61000-3-12
- Standards : IEC 61508
- Standards : UL 508C
- Standards : EN/IEC 61800-3 environment 2 category C3
- Standards : Environment 1 category C2 IEC 61800-3
- Standards : Environment 2 category C3 IEC 61800-3
- Standards : IEC 61800-3
- Standards : IEC 61800-3 environment 1 category C2
- Standards : IEC 61800-5-1
- Supply Frequency : 50...60 Hz - 5...5 %
- supporting protocol for ASI : No
- supporting protocol for AS-Interface Safety at Wor : No
- supporting protocol for BACnet : No
- supporting protocol for CAN : Yes
- supporting protocol for Data-Highway : No
- supporting protocol for DeviceNet : No
- supporting protocol for DeviceNet Safety : No
- supporting protocol for EtherNet/IP : Yes
- supporting protocol for Foundation Fieldbus : No
- supporting protocol for INTERBUS : No
- supporting protocol for INTERBUS-Safety : No
- supporting protocol for KNX : No
- supporting protocol for LON : No
- supporting protocol for MODBUS : Yes
- supporting protocol for other bus systems : No
- supporting protocol for PROFIBUS : Yes
- supporting protocol for PROFINET CBA : Yes
- supporting protocol for PROFINET IO : Yes
- supporting protocol for PROFIsafe : No
- supporting protocol for SafetyBUS P : No
- supporting protocol for SERCOS : No
- supporting protocol for SUCONET : No
- supporting protocol for TCP/IP : Yes
- Switching Frequency : 2...12 kHz adjustable
- Switching Frequency : 4...12 kHz with derating factor
- synchronous motor control profile : Permanent magnet motor
- synchronous motor control profile : Synchronous reluctance motor
- Take-back : No
- Temperature Ambient Operating Range : 5-140 °F (-15-60 °C)
- Temperature Shipping and Storage Range : -40-158 °F (-40-70 °C)
- transmission frame : RTU
- Transmission Rate : 10, 100 Mbits
- Transmission Rate : 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
- type of cooling : Forced convection
- type of polarization : No impedance
- Unit Type of Package 2 : P06
- UNSPSC Classification v19 : 39122001
- UNSPSC Classification v23 : 39122001
- variant : Standard version
- vibration resistance : 1 gn (f= 13-200 Hz) conforming to IEC 60068-2-6
- vibration resistance : 1.5 mm peak to peak (f= 2-13 Hz) conforming to IEC 60068-2-6
- volume of cooling air : 10038.7 Gal/hr(US) (38 m3/h)
- Volume of Package 2 : 360000.000 cm3
- Width : 5.7 in (144 mm)
- with safety function Safe brake management (SBC/SB : No
- with safety function Safe Direction (SDI) : No
- with safety function Safe Operating Stop (SOS) : No
- with safety function Safe Position (SP) : No
- with safety function Safe programmable logic : No
- with safety function Safe Speed Monitor (SSM) : No
- with safety function Safe Stop 1 (SS1) : No
- with safety function Safe torque off (STO) : Yes
- with safety function Safely Limited Position (SLP) : No
- with safety function Safely Limited Speed (SLS) : No
- with sft fct Safe Stop 2 (SS2) : No