zoom

Product pictures shown represent the general type of component listed.The product you select might not exactly match the photo.

E34E08

$1,759.77
$4,474.00
(No reviews yet) Write a Review
SKU:
E34E08
Adding to cart… The item has been added
E34E Modbus Series Multi-Circuit Power MeterModbus RTU, Modbus TCP, BACnet MS/TP, BACnet IP 8 (3-Phase) MetersANSI & IEC Class 0.5% accuracy, ideal for tenant billingLow equipment and installation cost per metering pointsPossibility to assign measurement channels as needed for the site: each channel can be assigned to a 3ph, 2ph or single phase meters. EG: A (4) 3ph meter E34, can be a (4) 3ph meter, (8) 2ph meter, (12) single phase, or any mix like (1) 3ph with Neutral + (1) 3 ph + (2) 2ph + (1) 1ph meters which amounts to 12 channels equivalent to (4) 3ph meters.Space saving size fits most electrical cabinetsLow voltage Current Transformers (CTs) offer a safer and more accurate alternative to 5A CTs and shorting blocks
[Us] rated supply voltage :
100...277 V AC 50/60 Hz
Ambient Air Temperature For Operation :
32…140 °F (0…60 °C)
Analogue Input Type :
12 solid core CT 0.333 V single phase ; 12 split core CT 0.333 V single phase ; 24 solid core CT 0.333 V single pole ; 24 split core CT 0.333 V single pole ; 8 solid core CT 0.333 V three phase ; 8 split core CT 0.333 V three phase
Application :
Sub billing
Brand :
Veris Industries
By Schneider :
Yes
communication of data :
High current alarm ; High-high current alarm ; Low current alarm ; Low-low current alarm ; Over voltage alarm ; Total energy ; Under voltage alarm
Communication Port Protocol :
BACnet IP 10, 100 Mbits ; BACnet MS/TP ; Modbus RTU 9600, 19200, 38400 bps even/odd or none - 2 wires ; Modbus TCP 9600, 19200, 38400 bps even/odd or none - 2 wires ; SNMP
Communication Port Support :
RJ45 ; Spring connector RS485
Communication Service :
Updating firmware
Data Recording :
Maximum of demand active power ; Maximum of demand current ; Maximum of instantaneous current
Depth :
12.09 in (307 mm)
Device Short Name :
EM4908
End of service date :
09/08/2021
energy management :
Billing analysis ; Sub billing and cost allocation
Final Result for Connectable :
Connectable ready
Final Result for Flywheel performance tracking :
Connectable ready
Height :
2.76 in (70 mm)
installation category :
III
Manufacturer :
Schneider Electric
Measurement Accuracy :
Current +/- 0.5 % of the measuring range ; Energy +/- 0.5 % of the measuring range ; Power +/- 0.5 % of the measuring range ; Voltage +/- 0.5 % of the measuring range
Measurement Voltage :
150…480 V AC 50/60 Hz between phases ; 90…277 V AC 50/60 Hz between phase and neutral
Metering Type :
Demand current I1, I2, I3, peak demand current IM1, IM2, IM3 ; Demand power P
Mounting Mode :
Wall mount
Network Frequency :
50 Hz ; 60 Hz
Pollution Degree :
2
power monitoring :
Basic instrumentation
Product Name :
PowerLogic EM4900E
Product Or Component Type :
Multi-circuit energy meter
Product Weight :
3.31 lb(US) (1.5 kg)
Range :
PowerLogic
REACh free of SVHC :
Yes
refresh time :
14 s BACnet) ; 2 s Modbus) ; 20 s SNMP)
Sampling Rate :
256 samples/cycle
Standards :
IEC 61010 ; UL 508
Temperature Shipping and Storage Range :
-40…158 °F (-40…70 °C)
Type Of Measurement :
Active energy ; Active power per phase ; Active power total ; Apparent power per phase ; Apparent power total ; Current average ; Current per phase, rms ; Phase angle ; Power factor average ; Power factor per phase
Web Services :
Web server
Width :
9.96 in (253 mm)

No Reviews Yet

Write a Review