The EP2 series electro pneumatic pressure transducer uses microcontrolled poppet valve technology for highly accurate pressure sensing in multiple applications. The poppet valves consume no air, eliminating unnecessary air losses in the system and allowing for stable and reliable operation. The EP2 comes installed on standard SnapTrack. An LCD display and LED indicators make it easy to read system status at a glance. | Provided equipment Cable ties : Door sensor, Installation guide, Lock handles, Proximity card, Proximity reader, Rack mounting brackets, User manual. Application Zone : Plant Room Application : Pneumatic Actuated Dampers, Pneumatic Actuators Dimension Depth : 1.8 In(46 mm) Dimension Height : 3.5 In (89 mm) Dimension Width : 3.3 In (84 mm) Display Type : None Electrical Wiring : 3-wires Fail Safe : Vent on power fail Fitting Material : Brass Fitting Size : 0.18 IN (4.3 mm) Fitting Type : Male Input Specifications : 4 - 20 mA | 0 - 5 V | 0 - 10 V LED Indicator Type :Red and Green Measurement Type : Electropneumatic Transducers Medium : Dry Air, Inert Gas Mounting : Panel Operating Humidity : 10 - 90% RH, non-condensing Operating Temperature : 25 - 140 °F (-4 - 60 °C) Output Specifications : None Pressure Measurement Accuracy : ±1% of F.S. Pressure Measurement Range : 3 - 15 psi (0.2 - 1 bar) | 0 - 20 psi (0 - 1.35 bar) Product Type : Sensor Supply Voltage AC Nominal : 24 VAC Supply Voltage AC Range : 24 - 30 VAC Supply Voltage DC Nominal : 24 VDC
- Accuracy : +/- 1 % FS~~
- Analogue Input Type : 4...20 mA
- Application : Pneumatic Actuated Dampers
- Brand : Veris Industries
- By Schneider : Yes
- California proposition 65 : WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Controlled Fluid : Dry Air
- Depth : 1.8 in (46 mm)
- Display Type : LCD
- End of commercialization annoucement date : 05/15/2025
- End of commercialization date : 08/15/2025
- Final Result for Connectable : Not connectable
- Final Result for Flywheel performance tracking : Non Flywheel
- Fitting Size : 4.3 mm (0.18")
- Fitting Type : Male
- Height : 3.5 in (89 mm)
- Location : Plant Room
- Manufacturer : Veris Industries
- Material : Brass: Fitting
- Mounting Mode : Panel
- Mounting Support : Panel
- Output Type : Analog 2-wire
- Packaging made with recycled cardboard : No
- Packaging without single use plastic : No
- Pressure Measurement Accuracy : +/- 1 % FS
- Pressure Measurement Range : 3...15 psi (0.2...1 bar)
- Product Certifications : CE
- Product Or Component Type : Pressure transmitter sensor
- Standards : EN 61000-6-3:2007
- Take-back : No
- Temperature Ambient Operating Range : 25…140 °F (-4…60 °C)
- Type Of Measurement : Electropneumatic Transducers
- Width : 3.3 in (84 mm)
- Wiring Technique : 3-wire