PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 14kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT J, 200A, 3 pole, circuit breaker has a breaking capacity of 14kA at 600VAC. This circuit breaker has a continuous current rating of 80%. This unit includes a factory installed 120VAC shunt trip. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
- Warranty : 18 months |PDF1
- Range : PowerPact
- Product name : PowerPact J
- Product or Component Type : Circuit breaker
- Device Application : Distribution
- Line Rated Current : 200 A
- Number of Poles : 3P
- control type : Toggle
- Breaking capacity code : D
- [Ue] rated operational voltage : 600 V AC 50/60 Hz IEC 60947-3
- Network Frequency : 50/60 Hz
- [Uimp] rated impulse withstand voltage : 8 kV IEC 60947-2
- Trip unit technology : Thermal-magnetic
- Magnetic tripping current : 2000 A
- Magnetic hold current : 1000 A
- Continuous current rating : 80 %
- [Ui] rated insulation voltage : 750 V IEC 60947-2
- Protection Type : Overload protection, Short-circuit protection
- Accessory / separate part type : Shunt trip 110...130 V AC compartment
- Suitability for isolation : Yes IEC 60947-2
- utilisation category : Category A
- AWG gauge : AWG 3/0...350 kcmil aluminium/copper terminals
- Local signalling : Switched off (OFF) 1 trip indicator green)
- Mounting mode : Unit mount lug)
- Mounting Support : Lug
- Electrical connection : Lugs, line, Lugs, load
- Terminal identifier : AL250JD
- Long time pick-up adjustment range : 0.25...1 x In
- mounting height : 4.5 in (114.30 mm)
- Tightening torque : 221.27 lbf.in (25 N.m) 0.15…0.29 in² (95…185 mm²) (AWG 3/0...350 kcmil)
- Power wire stripping length : 0.98 in (25 mm)
- Height : 7.52 in (191 mm)
- Width : 4.09 in (104 mm)
- Depth : 3.39 in (86 mm)
- Net Weight : 5.29 lb(US) (2.4 kg)
- Phase connection : BC
- communication interface : Modbus, Ethernet
- circuit breaker application : HACR rated
- Quality labels : CE
- Standards : UL, CSA, NEMA, NOM-003-SCFI-2000, IEC 60947-2
- Product certifications : UL, CSA, NOM
- IP degree of protection : Front cover IP40
- Pollution degree : 3 IEC 60947-1
- Ambient Air Temperature for Operation : -13…158 °F (-25…70 °C)
- Ambient Air Temperature for Storage : -58…185 °F (-50…85 °C)
- Operating altitude : < 6561.68 ft (2000 m) without derating, 5000 m with derating
- Category : US10DE201110
- Discount Schedule : 0DE2
- GTIN : 00785901526377
- Returnability : Yes
- Country of origin : MX
- Unit Type of Package 1 : PCE
- Number of Units in Package 1 : 1
- Package 1 Height : 5.70 in (14.478 cm)
- Package 1 Width : 7.40 in (18.796 cm)
- Package 1 Length : 8.70 in (22.098 cm)
- Package 1 Weight : 5.27 lb(US) (2.39 kg)
- Warranty : 18 months