Overview
Replacement actuator, only for use with Spyder and Stryker controllers with integral actuators. This non-spring return direct-coupled actuator provides floating control of VAV units. It provides reliable control for air damper applications with up to 10 sq ft (0.9 sq m) / 44 lb-in. (5 Nm) (seal-less damper blades; air friction-dependent).
Features
Declutch for manual adjustment Adjustable mechanical end limits Mountable in any orientation
- Application : HVAC
- Dimensions (in.) : 7.31 in high x 5.31 in wide x 3.25 in deep
- Dimensions (mm) : 186 mm high x 135 mm wide x 83 mm deep
- Includes : Shaft Adapter
- Used With : Spyder and Stryker controllers
- Weight (lb) : 1.2 lb
- Weight (kg) : 0.54 kg
- Materials : Plastic housing
- Item Type : Product
- Mounting : Direct Coupled
- Frequency : 50 Hz, 60 Hz
- Approvals, Underwriters Laboratories Inc. : UL873
- Tradeline Value : Tradeline
- Electrical Connections : Ribbon with a push on 3-pin connector for Spyder and Stryker controllers
- Operating Humidity Range (% RH) : 5 to 95% RH, non-condensing
- Supply Voltage : 24 Vac +20%, -15%, 24 Vdc
- Power Consumption : Driving-- 5 VA
- Shipping and Storage Temperature Range (F) : -22 F to +176 F
- Shipping and Storage Temperature Range (C) : -30 C to +80 C
- Approvals, CE : 89/336/ECC, 73/23/EEC
- Approvals, Canadian Underwriters Laboratories Inc. : cUL C22.2 No. 24-93
- Ambient Temperature Range (F) : -5 F to +122 F
- Ambient Temperature Range (C) : -20 C to +50 C
- Environmental, Electrical or Ingress Protection Rating : IP20
- Maximum Noise Rating : Driving (dB(A) @ 1m)-- 35
- Stroke : 95 ±3 degrees
- Shaft Dimensions (in.) : 1/4 to 1/2 in. square or 3/8 to 1/2 in. round
- Actuator Type : Damper
- Control Signal : Floating
- Fail Safe Mode : Non-Spring Return
- Torque Rating (lb-in.) : 44 lb-in.
- Torque Rating (Nm) : 5 Nm
- Additional Torque Ratings (lb-in.) : Maximum Stall-- 70 lb-in.
- Additional Torque Ratings (Nm) : Maximum Stall-- 8 Nm
- External Auxiliary Switches Available : No
- Rotation to Open : Up to 95 degrees
- Rotational Stroke Adjustment : Dual Integral Adjustable Stops
- Timing, Nominal : Driving @ 60 Hz-- 90 sec
- Shaft Adapter Type : U-bolt clamp
- Manual operation : Declutch mechanism
- Shaft Dimensions (mm) : 6 to 13 mm square or 9 to 13 mm round
