Overview
V5013B is a mixing three-way valve. V5013C is a diverting three-way valve. These valves provide proportional or two-position control of hot/chilled water in closed loop heating/cooling systems - offered in sizes 2 1/2 in. through 6 in.
Features
Not suitable for combustible gases.Valves utilize direct mounting valve actuators, Q5020/Q5022 linkages with Direct Coupled Actuators, or Pneumatic Valve Actuators to operate the valve.Constant total flow through full plug travel.Stainless steel stem prevents corrosion.Class IV (0.01% of Cv) Leakage Rating.
- Dimensions (in.) : 17 15/16 in. high x 11 in. wide x 16 1/2 in. deep
- Dimensions (mm) : 455 mm high x 279 mm wide x 418 mm deep
- Maximum Safe Operating Pressure (psi) : 150 psi at 240 F water
- Maximum Safe Operating Pressure (kPa) : 1034 kPa at 115 C water
- Used With : ML7421B, ML6421B, Q5001/Modutrol IV Motor
- Comments : Mixing
- Ambient Temperature Range (F) : 40 F to 250 F
- Ambient Temperature Range (C) : 4 C to 121 C
- Connection Type : Flanged
- Body Pattern : Three-way
- Pipe Size (inch) : 6 in.
- Pipe Size (DN) : DN150
- Bonnet Size (in.) : 1-7/8 in.
- Maximum Differential Pressure Ratings (Close-off) (psi) : For Quiet Water Service--20 psid
- Maximum Differential Pressure Ratings (Close-off) (kPa) : For Quiet Water Service--138 kPa
- Capacity (Cv) : 360 Cv
- Capacity (Kv) : 308 kvs
- Valve Action : Stem up increases B to AB flow
- Valve Type : Globe Valve
- Controlled Fluid : Chilled or hot water with up to 50% Glycol. Not for use with steam or fuels.
- Materials (Body) : Cast Iron
- Materials (Seat) : Bronze
- Materials (Stem) : Stainless Steel
- Flow Characteristic : Linear (constant total)
- Actuation : Must be purchased separately
- Static Pressure Rating (psi) : Meets ANSI 125 Standard
- Static Pressure Rating (kPa) : Meets ANSI 125 Standard
- ANSI/ASME Rating : 125
- Stem Travel (in.) : 1 1/2 in.
- Stem Travel (mm) : 38 mm
- Bonnet Size (mm) : 47.6 mm
- Materials (Packing) : Teflon Cone
