Overview
Control high pressure steam, liquids, air or noncombustible gases where positive final shutoff is not required.
Features
Q5001D Valve Linkage and Modutrol motor required for operation.Suitable for two-position, floating, or proportioning control, depending on the motor and controller used.Provide high capacity with minimum pressure drop.Pipe sizes include 1, 1-1/4, 1-1/2, and 2 inches.Straight-through construction and threaded end connections.Cast iron body with stainless steel trim.Plug provides equal percentage characteristic of flow.V-port for either throttling or on-off service.Replaceable seat rings screw into body.Spring-loaded Teflon cone packing for minimum friction.
- Dimensions (in.) : 6 3/4 in. high x 3 3/8 in. wide x 6 1/2 in. deep
- Dimensions (mm) : 171 mm high x 85 mm wide x 164 mm deep
- Maximum Safe Operating Pressure (psi) : 150 psi water, 100 psi steam
- Maximum Safe Operating Pressure (kPa) : 1034 kPa water, 690 kPa steam
- Used With : Q5001/Modutrol IV Motor
- Comments : Double seated
- Ambient Temperature Range (F) : 32 F to 337 F
- Ambient Temperature Range (C) : 0 C to 170 C
- Connection Type : Female NPT
- Body Pattern : Two-way
- Pipe Size (inch) : 2 in.
- Pipe Size (DN) : DN50
- Bonnet Size (in.) : 1-3/8 in.
- Capacity (Cv) : 50 Cv
- Capacity (Kv) : 43 kvs
- Valve Action : Stem down to close
- Valve Type : Globe Valve
- Controlled Fluid : Chilled or hot water with up to 50% Glycol or Steam. Not for use with fuels.
- Materials (Body) : Cast Iron
- Materials (Seat) : Stainless Steel
- Materials (Stem) : Stainless Steel
- Flow Characteristic : Equal Percentage
- Actuation : Must be purchased separately
- Static Pressure Rating (psi) : Meets ANSI 125 Standard
- Static Pressure Rating (kPa) : Meets ANSI 125 Standard
- ANSI/ASME Rating : 125
- Stem Travel (in.) : 3/4 in.
- Stem Travel (mm) : 20 mm
- Bonnet Size (mm) : 35 mm
- Materials (Packing) : Spring loaded non-adjustable Teflon V-ring
- Leakage : 0.005 of Cv
