Variable Speed Drive ATV12|4kW|Horsepower: 5HP|Voltage Rating: 200 to 240V|3 Phase - with Heat sink
- Brand : Schneider Electric
- By Schneider : Yes
- capacity of DC link : 1890.0 µF
- Communication Port Protocol : Modbus
- Communication Service : Read device identification (43)
- Communication Service : Read holding registers (03) 29 words
- Communication Service : Read/write multiple registers (23) 4/4 words
- Communication Service : Write multiple registers (16) 27 words
- Communication Service : Write single register (06) 29 words
- computer port : Yes
- Connector Type : 1 RJ45
- continuous output current : 16.7 A 4 kHz
- data format : 8 bits, configurable odd, even or no parity
- Depth : 5.6 in (141.2 mm)
- design of frequency changer : U converter
- Discrete Input Number : 4
- Discrete Output Number : 2
- Electromagnetic Compatibility : Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
- Electromagnetic Compatibility : Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
- Electromagnetic Compatibility : Immunity to conducted disturbances level 3 conforming to IEC 61000-4-6
- Electromagnetic Compatibility : Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
- Electromagnetic Compatibility : Surge immunity test level 3 conforming to IEC 61000-4-5
- Electromagnetic Compatibility : Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
- electromagnetic emission : Conducted emissions IEC 61800-3
- electromagnetic emission : Radiated emissions environment 1 category C2 IEC 61800-3 2...16 kHz shielded motor cable
- EMC filter : Without EMC filter
- EMC limit value (complied) : No
- environmental class (during operation) : Class 3C3 according to IEC 60721-3-3
- environmental class (during operation) : Class 3S2 according to IEC 60721-3-3
- Global Keywords : Altivar 12
- Global Keywords : Analog input
- Global Keywords : Analog output
- Global Keywords : Asynchronous motors
- Global Keywords : ATV12
- Global Keywords : Digital input
- Global Keywords : Digital output
- Global Keywords : Fans
- Global Keywords : Heat sink
- Global Keywords : Inverter
- Global Keywords : LED 7,segment display
- Global Keywords : Logical input
- Global Keywords : Logical output
- Global Keywords : Modbus
- Global Keywords : Motor monitoring functions
- Global Keywords : Motor protection functions
- Global Keywords : Plate mounting
- Global Keywords : Programmable
- Global Keywords : Pumps
- Global Keywords : Relay output
- Global Keywords : Schneider electric
- Global Keywords : Simple machines
- Global Keywords : Small power motors
- Global Keywords : Three phase
- Global Keywords : Variable speed variable speed drive
- Global Keywords : Vfd
- Global Keywords : Vsd
- Global Keywords : Wall mounting
- Height : 7.2 in (184 mm)
- housing material : Plastic
- insulation : Electrical between power and control
- IP Degree of Protection : IP20
- line current : 19.9 A 120 V heavy duty)
- line current : 23.8 A 100 V heavy duty)
- linearity error : +/- 0.3 % of maximum value analogue input
- Manufacturer : Schneider Electric
- Marking : CE
- maximum acceleration under shock impact (during op : 150 m/s² at 11 ms
- maximum acceleration under shock load (during stor : 150 m/s² at 11 ms
- maximum acceleration under shock load (during tran : 150 m/s² at 11 ms
- maximum acceleration under vibrational stress (dur : 10 m/s² at 13...200 Hz
- maximum acceleration under vibratory load (during : 10 m/s² at 13...200 Hz
- maximum associated fuse rating : 12.5 A
- maximum deflection under vibratory load (during op : 1.5 mm at 2...13 Hz
- maximum deflection under vibratory load (during st : 1.5 mm at 2...13 Hz
- maximum deflection under vibratory load (during tr : 1.5 mm at 2...13 Hz
- Maximum Horse Power Rating : 5 hp
- Maximum Input Current per phase : 19.9 A
- maximum output frequency : 4 kHz
- maximum output voltage : 240 V
- maximum transient current : 25.0 A 60 s heavy duty)
- maximum transient current : 27.6 A 2 s heavy duty)
- method of access : Server Modbus serial
- motor power kW : 4 kW
- motor slip compensation : Adjustable
- motor slip compensation : Preset in factory
- Mounting Mode : Cabinet mount
- Net Weight : 4.4 lb(US) (2 kg)
- Network Frequency : 50-60 Hz
- noise level : 50 dB
- nominal output current : 16.7 A
- Nominal Output Power : 4000.0 W
- nominal switching frequency : 4 kHz
- number of addresses : 1-247
- number of HW interfaces industrial Ethernet : 0
- number of HW interfaces other : 0
- number of HW interfaces parallel : 0
- number of HW interfaces PROFINET : 0
- number of HW interfaces serial RS232 : 0
- number of HW interfaces serial RS422 : 0
- number of HW interfaces serial RS485 : 1
- number of HW interfaces serial TTY : 0
- number of HW interfaces USB : 0
- number of input phases : 3
- number of inputs, bidirectional, not potential-fre : 0
- number of inputs, potential-free : 0
- number of output phases : 3
- Number of Units in Package 2 : 12
- Operating Altitude : > 3280.84...9842.52 ft (> 1000...3000 m) with current derating 1 % per 100 m
- operating element present : Yes
- operating position : Vertical +/- 10 degree
- optical interface present : No
- Overvoltage Category : Class III
- Package 2 GTIN : 73606480071200
- Package 2 Height : 29.53 in (75.000 cm)
- Package 2 Length : 31.50 in (80.000 cm)
- Package 2 Weight : 93.317 lb(US) (42.328 kg)
- Package 2 width : 23.62 in (60.000 cm)
- Protection Type : Overheating protection
- Protection Type : Short-circuit between motor phases
- Quantity Per Set : Set of 1
- Regulation Loop : Adjustable PID regulator
- Relative Humidity : 5-95 % without condensation IEC 60068-2-3
- Relative Humidity : 5-95 % without dripping water IEC 60068-2-3
- relative symmetric mains voltage tolerance : 10 %
- relative symmetric network frequency tolerance : 5 %
- relay output number : 1
- sampling duration : 10 ms analogue input
- sampling duration : 20 ms +/- 1 ms logic input
- SCIP Number : Eb402eec-70b4-4110-88ef-bfba25b2fe94
- shock resistance : 15 gn 11 ms IEC 60068-2-27
- speed drive output frequency : 0.5-400 Hz
- speed range : 1-20
- Standards : UL 508C
- Standards : IEC 61800-3
- Standards : IEC 61800-5-1
- Standards : UL 618000-5-1
- Supply Frequency : 50/60 Hz +/- 5 %
- supporting protocol for ASI : No
- supporting protocol for AS-Interface Safety at Wor : No
- supporting protocol for BACnet : No
- supporting protocol for CAN : No
- supporting protocol for Data-Highway : No
- supporting protocol for DeviceNet : No
- supporting protocol for DeviceNet Safety : No
- supporting protocol for EtherNet/IP : No
- supporting protocol for Foundation Fieldbus : No
- supporting protocol for INTERBUS : No
- supporting protocol for INTERBUS-Safety : No
- supporting protocol for KNX : No
- supporting protocol for LON : No
- supporting protocol for MODBUS : Yes
- supporting protocol for other bus systems : No
- supporting protocol for PROFIBUS : No
- supporting protocol for PROFINET CBA : No
- supporting protocol for PROFINET IO : No
- supporting protocol for PROFIsafe : No
- supporting protocol for SafetyBUS P : No
- supporting protocol for SERCOS : No
- supporting protocol for SUCONET : No
- supporting protocol for TCP/IP : No
- Switching Frequency : 2...16 kHz adjustable
- Switching Frequency : 4...16 kHz with derating factor
- Take-back : No
- Temperature Ambient Operating Range : 14-140 °F (-10-60 °C)
- Temperature Shipping and Storage Range : -13-158 °F (-25-70 °C)
- Tightening Torque : 10.6 lbf.in (1.2 N.m)
- Time Constant : 20 ms +/- 1 ms for reference change
- transient overtorque : 150-170 % of nominal motor torque depending on drive rating and type of motor
- transmission frame : RTU
- Transmission Rate : 19.2 kbit/s
- Transmission Rate : 38.4 kbit/s
- Transmission Rate : 9.6 kbit/s
- type of polarization : No impedance
- Unit Type of Package 2 : P06
- UNSPSC Classification v19 : 39122001
- UNSPSC Classification v23 : 39122001
- vibration resistance : 1 gn 13-200 Hz)IEC 60068-2-6
- vibration resistance : 1.5 mm peak to peak 3-13 Hz) - drive unmounted on symmetrical DIN rail - IEC 60068-2-6
- volume of cooling air : 4332.5 Gal/hr(US) (16.4 m3/h)
- Volume of Package 2 : 360000.000 cm3
- Warranty : 18 months
- Width : 5.5 in (140 mm)
- with safety function Safe brake management (SBC/SB : No
- with safety function Safe Direction (SDI) : No
- with safety function Safe Operating Stop (SOS) : No
- with safety function Safe Position (SP) : No
- with safety function Safe programmable logic : No
- with safety function Safe Speed Monitor (SSM) : No
- with safety function Safe Stop 1 (SS1) : No
- with safety function Safe torque off (STO) : No
- with safety function Safely Limited Position (SLP) : No
- with safety function Safely Limited Speed (SLS) : No
- with sft fct Safe Stop 2 (SS2) : No