PENN Commercial Refrigeration

560 of 755 Items
  • These controls measure the pressure differential between the pressure generated by the oil pump and the refrigerant pressure at the crankcase. A built-in time delay switch allows for pressure-pick up on start and avoids nuisance shutdowns on pressure drops of short duration during the running cycle. When the compressor is started, the time delay switch is energised. If the net oil pressure does not build up within the required time limit, the time delay switch trips to stop the compressor. If the net oil pressure rises within the required time after the compressor starts, the time delay switch is automatically de-energised and the compressor continues to operate normally. If the net oil pressure should drop below setting (scale pointer) during the running cycle, the time delay switch is energised and, unless the net oil pressure returns to cut-in point within the time delay period, the compressor will be shut down, and have to be manual reset. The compressor can never run longer than the predetermined time on low oil pressure. Controls are available only for manual reset after cut-out.8/70 PSI,DIFF. 4.5+/-2.0,36 CAP, MAN RESET,JUMP NOT INSTLL, NEMA 1

    Johnson Controls

    P28AA-1C

    These controls measure the pressure differential between the pressure generated by the oil pump and the refrigerant pressure at the crankcase. A built-in time delay switch allows for pressure-pick up on start and avoids nuisance shutdowns on pressure...

    $330.51
    cartAdd to Cart
  • These controls measure the pressure differential between the pressure generated by the oil pump and the refrigerant pressure at the crankcase. A built-in time delay switch allows for pressure-pick up on start and avoids nuisance shutdowns on pressure drops of short duration during the running cycle. When the compressor is started, the time delay switch is energised. If the net oil pressure does not build up within the required time limit, the time delay switch trips to stop the compressor. If the net oil pressure rises within the required time after the compressor starts, the time delay switch is automatically de-energised and the compressor continues to operate normally. If the net oil pressure should drop below setting (scale pointer) during the running cycle, the time delay switch is energised and, unless the net oil pressure returns to cut-in point within the time delay period, the compressor will be shut down, and have to be manual reset. The compressor can never run longer than the predetermined time on low oil pressure. Controls are available only for manual reset after cut-out.8/70 PSI,36 CAP, MAN RESET,JUMP NOT INSTLL, NEMA 1

    Johnson Controls

    P28AA-17C

    These controls measure the pressure differential between the pressure generated by the oil pump and the refrigerant pressure at the crankcase. A built-in time delay switch allows for pressure-pick up on start and avoids nuisance shutdowns on pressure...

    $330.51
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.P266PRM-1K FAN SPEED CABL

    Johnson Controls

    P266PRM-1K

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $124.96
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.PRESSURE TRANSDUCER0-754PSI(0-52BAR)1/4INFEMALE FLARE 6.5FT CABLE

    Johnson Controls

    P266SNR-2C

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $165.89
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.PRESSURE TRANSDUCER0-508PSI(0-35BAR)1/4INFEMALE FLARE 6.5FT CABLE

    Johnson Controls

    P266SNR-1C

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $165.89
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.FAN SPEED CONTROLKIT

    Johnson Controls

    P266ECA-1K

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $746.15
    cartAdd to Cart
  • These controllers are designed for speed variation of 3-phase motors, especially for fan speed control on air cooled condensers. Head pressure control of a refrigeration system, through speed variation of the fan, results in optimum performance throughout the year. Using a pressure transducer as the input device, gives the most direct and fastest response to pressure variations in the refrigerant system. The controller varies the supply voltage to the motor from 30% to at least 96% over the proportional band using the phase cutting principle.CONTROL 400VAC 50/60HZ NO

    Johnson Controls

    P266CHA-100C

    These controllers are designed for speed variation of 3-phase motors, especially for fan speed control on air cooled condensers. Head pressure control of a refrigeration system, through speed variation of the fan, results in optimum performance...

    $613.01
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.FAN SPEED CNTRL KIT 208/230 W/1 P266BHA-100C and 2 P266SNR-2C

    Johnson Controls

    P266BHA-4K

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $866.13
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.FAN SPEED CNTRL KIT 208/230 W/1 P266BHA-100C and 1 P266SNR-2C

    Johnson Controls

    P266BHA-3K

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $826.58
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.FAN SPEED CNTRL KIT 208/230 W/1 P266BHA-100C and 2 P266SNR-1C

    Johnson Controls

    P266BHA-2K

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $883.27
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.FAN SPEED CNTRL KIT 208/230 W/1 P266BHA-100C and 1 P266SNR-1C

    Johnson Controls

    P266BHA-1K

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $734.29
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.INCLUDED FAN SPEED CONTROL 460-575V 4 AMP 2 MAIN 3 AUX TRIACTRANSDUCER NOT

    Johnson Controls

    P266BHA-100C

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $584.67
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.P266BGA-100C CONTROL-40XC

    Johnson Controls

    P266BGA-100C

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $567.54
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.460/575V 4 AMP 1 MAIN 3 AUX TRIAC TRANSDUCER NOT INCLUDED

    Johnson Controls

    P266BDA-100C

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $529.95
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.FAN SPEED CONTROL 460/575VOLT 4 AMP 1 MAIN TRIAC ONLY TRANSDCR NOT INCLD

    Johnson Controls

    P266BCA-100C

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $477.22
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.FAN SPEED CONTROL 208/2308AMP 1 MAIN TRIAC ONLYTRANSDUCER NOT INCLUDED

    Johnson Controls

    P266ACA-100C

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $473.28
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.FAN SPEED CNTRL KIT 208/230 W/1 P266ABA-100C and 1 P266SNR-2C

    Johnson Controls

    P266ABA-3K

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $715.18
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.FAN SPEED CNTRL KIT 208/230 W/1 P266ABA-100C and 2 P266SNR-1C

    Johnson Controls

    P266ABA-2K

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $965.00
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.FAN SPEED CNTRL KIT 208/230 W/1 P266ABA-100C and 1 P266SNR-1C

    Johnson Controls

    P266ABA-1K

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $715.18
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.208-240V, 8 AMP, 3 MAIN, 3 AUX TRIACS, TRANSDUCER NOT INCLUDED

    Johnson Controls

    P266ABA-100C

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $565.55
    cartAdd to Cart
  • The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety of refrigeration and air conditioning condenser fan applications. The P266 series controls are designed to replace the Johnson Controls P66 series and P215 series fan speed controls, providing additional features and flexibility, greater energy efficiency, and longer motor life in a compact, rugged, weather-resistant package. P266 models are available for 208 to 240 V AC and 440 to 575 V AC range applications. P266 controls have current ratings from 4 to 12 A depending on the voltage and model. Some P266 models provide optional control of up to three auxiliary (fixed-speed) fans or fan stages. Also, some models provide two additional high-voltage triacs, which allow you to split the source power to the main and auxiliary windings, and connect a low-speed capacitor to increase efficiency at low speed operation.INCL FAN SPEED CONTROL 208/230VOLT 8AMP 3 AMIN NO AUX TRIACS TRANSDCR NOT

    Johnson Controls

    P266AAA-100C

    The P266 pressure actuated single phase digital controller is a cost-effective, weather-resistant, durable motor speed control. The P266 control is designed for approved single-phase, Permanent Split-Capacitor (PSC) motors commonly used in a wide variety...

    $477.22
    cartAdd to Cart
  • The P20 series high and low limit (cut-out) controls for all non-corrosive refrigerants are compact pressure controls ideally suited for commercial or residential packaged air conditioning units, heat pumps, small water chillers, ice cube machines and other applications where a semi fixed setting is acceptable or required and where mounting space is limited. The P20 series includes auto reset as well as manual reset models and is factory set. A special setting tool is available while also field (screwdriver) adjustable models can be chosen.100/425# ADJ,36 CAP, SPDT, 1HP,ENCL-OPEN

    Johnson Controls

    P20EB-2C

    The P20 series high and low limit (cut-out) controls for all non-corrosive refrigerants are compact pressure controls ideally suited for commercial or residential packaged air conditioning units, heat pumps, small water chillers, ice cube machines and...

    $112.67
    cartAdd to Cart
  • The P20 series high and low limit (cut-out) controls for all non-corrosive refrigerants are compact pressure controls ideally suited for commercial or residential packaged air conditioning units, heat pumps, small water chillers, ice cube machines and other applications where a semi fixed setting is acceptable or required and where mounting space is limited. The P20 series includes auto reset as well as manual reset models and is factory set. A special setting tool is available while also field (screwdriver) adjustable models can be chosen.7/150# ADJ,36 CAP, SPDT, 1HP,ENCL-OPEN

    Johnson Controls

    P20EB-1C

    The P20 series high and low limit (cut-out) controls for all non-corrosive refrigerants are compact pressure controls ideally suited for commercial or residential packaged air conditioning units, heat pumps, small water chillers, ice cube machines and...

    $103.33
    cartAdd to Cart
  • The P20 series high and low limit (cut-out) controls for all non-corrosive refrigerants are compact pressure controls ideally suited for commercial or residential packaged air conditioning units, heat pumps, small water chillers, ice cube machines and other applications where a semi fixed setting is acceptable or required and where mounting space is limited. The P20 series includes auto reset as well as manual reset models and is factory set. A special setting tool is available while also field (screwdriver) adjustable models can be chosen.100/425# ADJ,36 CAP, OPEN HI, 1HP,ENCL-OPEN, MAN RESET

    Johnson Controls

    P20DB-1C

    The P20 series high and low limit (cut-out) controls for all non-corrosive refrigerants are compact pressure controls ideally suited for commercial or residential packaged air conditioning units, heat pumps, small water chillers, ice cube machines and...

    $117.68
    cartAdd to Cart
  • The P20 series high and low limit (cut-out) controls for all non-corrosive refrigerants are compact pressure controls ideally suited for commercial or residential packaged air conditioning units, heat pumps, small water chillers, ice cube machines and other applications where a semi fixed setting is acceptable or required and where mounting space is limited. The P20 series includes auto reset as well as manual reset models and is factory set. A special setting tool is available while also field (screwdriver) adjustable models can be chosen.100/425#,36 CAP, OPEN HI, 1HP,ENCL-OPEN, AUTO RESET

    Johnson Controls

    P20CA-146C

    The P20 series high and low limit (cut-out) controls for all non-corrosive refrigerants are compact pressure controls ideally suited for commercial or residential packaged air conditioning units, heat pumps, small water chillers, ice cube machines and...

    $109.07
    cartAdd to Cart
560 of 755 Items