KMC Controls

640 of 1114 Items
  • MEP-4001V

    KMC Controls

    MEP-4001V

    Actuator: Tri-State, Non-Failsafe, 24VAC, 40 in-lbs, QuickMount :- These compact but powerful direct-coupled actuators provide tri-state or proportional control for small dampers or valves in HVAC systems. A minimum torque of 40 (MEP-40xx) or 80...

    $104.89
    cartAdd to Cart
  • MEP-4001

    KMC Controls

    MEP-4001

    Actuator: Tri-State, Non-Failsafe, 24VAC, 40 in-lbs :- These compact but powerful direct-coupled actuators provide tri-state or proportional control for small dampers or valves in HVAC systems. A minimum torque of 40 (MEP-40xx) or 80 (MEP-48xx)...

  • VEB-5616BSFK

    KMC Controls

    VEB-5616BSFK

    Valve: 4" 3W Flanged, 118 CV, Proportional, Failsafe :- The KMC VEB-56 series ball control valves are three-way, mixing or diverting, flanged valves, designed for control of hot water or chilled water. These valves range in size from 4 to 6 inches with...

    $1,762.72
    cartAdd to Cart
  • VEB-5616BSFH

    KMC Controls

    VEB-5616BSFH

    Valve: 4" 3W Flanged, 118 CV, Floating, Failsafe :- The KMC VEB-56 series ball control valves are three-way, mixing or diverting, flanged valves, designed for control of hot water or chilled water. These valves range in size from 4 to 6 inches with...

    $1,818.86
    cartAdd to Cart
  • VEB-5616BSFF

    KMC Controls

    VEB-5616BSFF

    Valve: 4" 3W Flanged, 118 CV, Floating, Non-Failsafe :- The KMC VEB-56 series ball control valves are three-way, mixing or diverting, flanged valves, designed for control of hot water or chilled water. These valves range in size from 4 to 6 inches with...

    $1,757.20
    cartAdd to Cart
  • HPO-9002

    KMC Controls

    HPO-9002

    Accessory: STE-9xx1 NetSensor and STE-8x01 AppStat Foam... :- Foam insulating gasket for Conquest STE-9xx1 NetSensors and STE-8×01 AppStats.\xa0It mounts between the black backplate and the electrical box. For the KMD-116x, KMD-118x, and KMD-12×1...

  • HPO-0067

    KMC Controls

    HPO-0067

    Accessory: Surge Protector Terminal Connector (of KMD-5567) :- Replacement component (terminal connector) for KMD-5567.

    $101.11
    cartAdd to Cart
  • HPO-0066

    KMC Controls

    HPO-0066

    Accessory: Surge Protector Module (of KMD-5567) :- Replacement component (suppressor module) for KMD-5567.

    $338.83
    cartAdd to Cart
  • VEB-5616ASFL

    KMC Controls

    VEB-5616ASFL

    Valve: 4" 3W Flanged, 91 CV, Proportional, Failsafe :- The KMC VEB-56 series ball control valves are three-way, mixing or diverting, flanged valves, designed for control of hot water or chilled water. These valves range in size from 4 to 6 inches with...

    $1,819.12
    cartAdd to Cart
  • VEB-5616ASFK

    KMC Controls

    VEB-5616ASFK

    Valve: 4" 3W Flanged, 91 CV, Proportional, Non-Failsafe :- The KMC VEB-56 series ball control valves are three-way, mixing or diverting, flanged valves, designed for control of hot water or chilled water. These valves range in size from 4 to 6 inches...

    $1,762.72
    cartAdd to Cart
  • STE-6018W10

    KMC Controls

    STE-6018W10

    Sensor: Room Temp, Setpoint Dial, LED, Override, Modular, White :- These compact, stylish, and economical room temperature sensors are designed for use with KMC digital controllers. They incorporate a 10,000 ohm (@ 77° F) thermistor for precise, stable...

  • HMO-6036

    KMC Controls

    HMO-6036

    Accessory: Wall Plate, 2"x2" (STE-6xxx and THE-1102) Sensors, Almond :- Wall plate (for mounting to 2 x 4 electrical boxes) for STE-6000 series temperature sensors and THE-1102 humidity transmitters with temperature sensors, almond.

  • HMO-6036W

    KMC Controls

    HMO-6036W

    Accessory: Wall Plate, 2"x2" (STE-6xxx and THE-1102) Sens... :- Wall plate (for mounting to 2 x 4 electrical boxes) for\xa0STE-6000 series\xa0temperature sensors and\xa0THE-1102\xa0humidity transmitters with temperature sensors, white.

  • HMO-6036W80

    KMC Controls

    HMO-6036W80

    Accessory: SimplyVAV, Wallplate, Discrete STE-6010W80 Se... :- Wall plate (for mounting to 2 x 4 electrical boxes) for\xa0STE-6000 series\xa0temperature sensors and\xa0THE-1102\xa0humidity transmitters with temperature sensors, white.

  • HMO-5042

    KMC Controls

    HMO-5042

    Accessory: Wall Plate, KMD-1151/1171 NetSensor, Almond :- Universal (4-1/2 inches square) mounting plate for (discontinued) KMD-1151/1171 NetSensors, light almond.

  • HMO-5031

    KMC Controls

    HMO-5031

    Accessory: Wall Plate, 2"x3" (THE-1105, CTE-51xx, and CTC16xx) Thermostat, White :- White backplate kit for\xa0THE-1105 humidity transmitters with temperature sensors, CTE-5100 series electronic thermostats, and\xa0CTC-1600 series pneumatic thermostats...

  • HMO-5030

    KMC Controls

    HMO-5030

    Accessory: Wall Plate, 2"x3" (THE-1105, CTE-51xx, and CTC16xx) Thermostat, Almond :- Light almond backplate kit for\xa0THE-1105\xa0humidity transmitters with temperature sensors,\xa0CTE-5100\xa0series electronic thermostats, and\xa0CTC-1600\xa0series...

  • HMO-5026

    KMC Controls

    HMO-5026

    Accessory: Wall Plate, 2"x3" (THE-1105, CTE-51xx, and CTC16xx) Thermostat, White/Aluminum :- White with aluminum trim backplate kit for\xa0THE-1105\xa0humidity transmitters with temperature sensors,\xa0CTE-5100\xa0series electronic thermostats,...

  • HMO-5024

    KMC Controls

    HMO-5024

    Accessory: Wall Plate, 2"x3" (THE-1105, CTE-51xx, and CTC16xx) Thermostat, Almond/Aluminum :- Light almond with aluminum trim backplate kit for\xa0THE-1105\xa0humidity transmitters with temperature sensors,\xa0CTE-5100\xa0series electronic thermostats,...

  • VEB-5616ASFH

    KMC Controls

    VEB-5616ASFH

    Valve: 4" 3W Flanged, 91 CV, Floating, Failsafe :- The KMC VEB-56 series ball control valves are three-way, mixing or diverting, flanged valves, designed for control of hot water or chilled water. These valves range in size from 4 to 6 inches with...

    $1,818.86
    cartAdd to Cart
  • STE-1424

    KMC Controls

    STE-1424

    Sensor: Immersion (or Duct), Temperature, 10K-Type III, 6" Probe :- The KMC STE-1400 Series, Type III, 10,000 ohm thermistor temperature sensors are available in different housings for surface, duct, duct averaging, immersion, strap-on, and outside air...

  • STE-1423

    KMC Controls

    STE-1423

    Sensor: Immersion (or Duct), Temperature, 10K-Type III, 4" Probe :- The KMC STE-1400 Series, Type III, 10,000 ohm thermistor temperature sensors are available in different housings for surface, duct, duct averaging, immersion, strap-on, and outside air...

  • HMO-4532

    KMC Controls

    HMO-4532

    Accessory: Thermal Compound, 1oz, for Thermowells :- For use with HMO-45xx thermowells. Filling the thermowell before inserting the immersion sensor probe maximizes the heat transfer from the thermowell and the sensor probe.

  • VEB-5616ASFF

    KMC Controls

    VEB-5616ASFF

    Valve: 4" 3W Flanged, 91 CV, Floating, Non-Failsafe :- The KMC VEB-56 series ball control valves are three-way, mixing or diverting, flanged valves, designed for control of hot water or chilled water. These valves range in size from 4 to 6 inches with...

    $1,757.20
    cartAdd to Cart
  • CEP-4012

    KMC Controls

    CEP-4012

    Controller: VAV, 45 in-lbs, 100 deg, CW Close, SSE-1002 :- The analog electronic CEP-4000 series pressure-independent controller-actuators are designed primarily for use on variable air volume terminal units. Cooling and heating air flow is sensed by a...

    $311.50
    cartAdd to Cart
  • HMO-4511

    KMC Controls

    HMO-4511

    Accessory: Mounting Bracket, RCC-1000, Pack of 5 :- Metal mounting brackets (pack of 5) for RCC-1000 series pneumatic relays. It adds a mounting bracket to: RCC-1101RCC-1102RCC-1106RCC-1108RCC-1109RCC-1112It replaces a lost bracket for:...

  • HMO-4004

    KMC Controls

    HMO-4004

    Accessory: Anti-Rotation Ball Valve Mount, MEP-4000 :- The HMO-4004 non-rotation bracket kit is formounting MEP-4000 series actuators (except quick-mount "V" models) to ball valves. It includes "long" and "short" mount brackets and related hardware...

  • VEB-5324FSGL

    KMC Controls

    VEB-5324FSGL

    Valve: 6" 2W Flanged, 650 CV, Proportional, Failsafe :- KMC VEB-53 series control ball valves are two-way flanged valves, designed for control of hot or chilled water. These valves range in size from 4 to 6 inches with equal-percentage flow...

    $2,541.47
    cartAdd to Cart
  • STE-9010W10

    KMC Controls

    STE-9010W10

    Sensor: Room Temp, Modular, White, No Display :- This compact, stylish, and economical room temperature sensor is designed for use with KMC digital controllers. It incorporates a 10,000 ohm (@ 77° F) thermistor for precise, stable temperature sensing...

  • HMO-10000W

    KMC Controls

    HMO-10000W

    Accessory: Wall Plate, (BAC-12xxxx, STE-9xxxx, and AppSta... :- White, horizontal or 4 x 4 handy box wall mounting plate for: BAC-12xxxx FlexStat models (not needed for BAC-13xxxx/14xxxx FlexStat models)STE-9xxx\xa0series Conquest...

  • HMO-10000

    KMC Controls

    HMO-10000

    Accessory: Wall Plate, (BAC-12xxxx, STE-9xxxx, and AppStat) Digital Sensor/Controller, Almond :- Light almond, horizontal or 4 x 4 handy box wall mounting plate for: BAC-12xxxx FlexStat models (not needed for BAC-13xxxx/14xxxx FlexStat...

  • VEB-5324FSGK

    KMC Controls

    VEB-5324FSGK

    Valve: 6" 2W Flanged, 650 CV, Proportional, Non-Failsafe :- KMC VEB-53 series control ball valves are two-way flanged valves, designed for control of hot or chilled water. These valves range in size from 4 to 6 inches with equal-percentage flow...

    $2,485.05
    cartAdd to Cart
  • MCP-36313001

    KMC Controls

    MCP-36313001

    Actuator: Rotary, 5-10 PSI, Square Shaft :- These rotary pneumatic damper actuators are designed to position VAV terminals and other small dampers in HVAC systems. Models ending in the €œ000€ designation will mount to 1/2"; diameter damper...

640 of 1114 Items