Overview
M6410A and M7410F Cartridge Globe Valve Non-Spring Return Actuators are small electric actuators for individual room control that provide floating or modulating control of V5852, V5862 two-way or V5853, V5863 three-way valves.
Features
Suitable for Excel/IRC system or other controllers providing specified signals.Magnetic coupling for torque limitation independent of voltage supply and self-adjustment of the close-off port.No mounting tools required.Small size allows installation in limited space of fan coil units, induction units, and small reheaters or recoolers.Visual position indication (red pin).
- Application : HVAC
- Dimensions (in.) : 2 3/8 in. high x 1 15/16 in. wide x 3 15/16 in. deep
- Dimensions (mm) : 61 mm high x 49 mm wide x 100 mm deep
- Includes : 1/2 in. conduit hub
- Used With : 1 inch to 1-1/2 inch V58XX Globe Valves
- Weight (lb) : 0.35 lb
- Weight (kg) : 0.16 kg
- Materials : Low Maintenance Plastic Housing
- Comments : Direct/Reverse Acting Switch
- Item Type : Product
- Mounting : Threads onto V58XX valve bonnet
- Frequency : 50 Hz, 60 Hz
- Approvals, Underwriters Laboratories Inc. : Flammability Rating UL94V-5V
- Electrical Connections : Plenum-rated cable
- Operating Humidity Range (% RH) : 5 to 95% RH
- Supply Voltage : 24 Vac +10%, -30%
- Power Consumption : Driving-- 1.4 VA
- Shipping and Storage Temperature Range (F) : -40 F to +158 F
- Shipping and Storage Temperature Range (C) : -40 C to +70 C
- Ambient Temperature Range (F) : 32 F to 122 F
- Ambient Temperature Range (C) : 0 C to 50 C
- Environmental, Electrical or Ingress Protection Rating : IP42,Class I Insulation (24 Vac)
- Fluid Temperature (C) : 130 C Maximum
- Fluid Temperature (F) : 266 F Maximum
- Actuator Type : Valve
- Control Signal : 0 to 10 Vdc, 2 to 10 Vdc
- Fail Safe Mode : Stays in place
- Torque Rating (lb-in.) : 67.5 lbf
- Torque Rating (Nm) : 300 N
- Switches : No
- Stroke (in.) : 1/4 in.
- Stroke (mm) : 6 mm
- Cable : Threaded conduit connector
- Timing, Nominal : Driving @ 60 Hz (sec)-- 125 sec
- Feedback : No
- Manual operation : None (use valve dust cap)
- Input Impedance : 100K ohm