Overview
All of these sensors have a solid-state output with an adjustable or fixed trip point (setpoint). These current switches should be used in applications in which a "Go/No Go" current switch is required. The current switches can be used to monitor devices with a maximum continuous operating current of up to 250 Amps. These current switches do not need to be externally powered, since the power for the switch is induced from the conductor being monitored. The split core switches are ideal for retrofit or existing installations, since it is not necessary to power down the unit and disconnect any wires during the installation process. Solid core switches are extremely easy to install, they are an excellent choice for new installations.
Features
Solid or split core switches with fixed or adjustable trip pointsVery low operating trip pointsLED status indicationIntegral DIN rail mounting flangeAccepts up to a 350 MCM (17.3 mm) cableOperates up to 250 continuous ampsRoHS and WEEE CompliantLimited 5 year warranty.
- Dimensions (in.) : 2.356 in. high x 2.645 in. wide x 0.94 in. deep
- Dimensions (mm) : 60 mm high x 67 mm wide x 24 mm deep
- Frequency : 50 H, 60 Hz
- Approvals, Underwriters Laboratories Inc. : Approved
- Operating Humidity Range (% RH) : 0 to 95% RH, non-condensing
- Operating Temperature Range (F) : -22 to 140oF
- Operating Temperature Range (C) : -30 to 60oC
- Approvals, CE : Approved
- Core Type : Split
- Maximum Current : continuous-- 158 Amps: for 6 seconds--240 Amps: for 1 second--600 Amps
- Normal Position : N. O.
- Output Switch Rating : 1A Continuous @36 VAC/VDC
- Isolation Voltage : 2200 Vac
- Trip Point : 0.70-150 Amps
- Aperture Size : 0.53" dia., up to 1 AWG cables
- Approvals, Environmental Compliance : ROHS-Directive 2011/95/EC
- Max Sensing Current Voltage : 600 Vac
- Enclosure Rating/Color : UL94-V0/Burgundy
