- Application : HVAC
- Dimensions (in.) : 8.78 in high x 3.62 in wide x 3.15 in deep
- Dimensions (mm) : 223 mm high x 92 mm wide x 80 mm deep
- Weight (lb) : 2.98 lb
- Weight (kg) : 1.35 kg
- Materials : Plenum rated plastic housing
- Comments : Integral 1/2 in. NPSM conduit connection.
- Item Type : Product
- Mounting : Direct Coupled
- Frequency : 50 Hz, 60 Hz
- Approvals, Underwriters Laboratories Inc. : UL873, Plenum Rated
- Tradeline Value : Tradeline
- Electrical Connections : Enclosed screw terminal strip (22 to 14 AWG)
- Operating Humidity Range (% RH) : 5 to 95% RH, non-condensing
- Supply Voltage : 24 Vac ±20%
- Power Consumption : Driving-- 6 VA, 6 W
- Shipping and Storage Temperature Range (F) : -40 F to +175 F
- Shipping and Storage Temperature Range (C) : -40 C to +80 C
- Approvals, CE : 89/336/ECC, 73/23/EEC
- Approvals, Canadian Underwriters Laboratories Inc. : cUL C22.2 No. 24-93
- Ambient Temperature Range (F) : -5 F to +140 F
- Ambient Temperature Range (C) : -20 C to +60 C
- Approvals, C-Tick : N314
- Environmental, Electrical or Ingress Protection Rating : NEMA 2, IP54
- Maximum Noise Rating : Driving (dB(A) @ 1m)-- 40
- Stroke : 95 ±3 degrees
- Shaft Dimensions (in.) : 3/8 to 1.06 in. round or 3/8 to 11/16 in. square
- Actuator Type : Damper, Valve
- Control Signal : (0)2-10 Vdc (4-20 mA w/500 ohm resistor)
- Fail Safe Mode : Non-Spring Return
- Torque Rating (lb-in.) : 175 lb-in.
- Torque Rating (Nm) : 20 Nm
- Additional Torque Ratings (lb-in.) : Maximum Stall-- 257 lb-in.
- Additional Torque Ratings (Nm) : Maximum Stall-- 29 Nm
- External Auxiliary Switches Available : Yes, SW2-US
- Rotation to Open : By switch
- Rotational Stroke Adjustment : Dual Integral Adj. Stops (3 degree increments)
- Timing, Nominal : Driving @ 60 Hz-- 95 sec
- Shaft Adapter Type : Self-centering clamping
- Manual operation : Declutch mechanism
- Shaft Dimensions (mm) : 10 to 27 mm round or 10 to 18 mm square
- Input Impedance : 100K ohm (voltage), 500 ohm (current)