- Application : HVAC
- Dimensions (in.) : 5.23 in high x 2.60 in wide x 2.44 in deep
- Dimensions (mm) : 134 mm high x 66 mm wide x 62 mm deep.
- Weight (lb) : 1 lb
- Weight (kg) : 0.45 kg
- Materials : Plenum rated plastic housing
- Comments : Integral 1/2 in. NPSM conduit connection.
- Item Type : Product
- Mounting : Direct Coupled
- Frequency : 50 Hz, 60 Hz
- Approvals, Underwriters Laboratories Inc. : UL873, Plenum Rated
- Tradeline Value : Tradeline
- Electrical Connections : Enclosed screw terminal strip (22 to 14 AWG)
- Operating Humidity Range (% RH) : 5 to 95% RH, non-condensing
- Supply Voltage : 24 Vac +20%, -15%, 24 Vdc
- Power Consumption : Driving-- 5 VA
- Shipping and Storage Temperature Range (F) : -22 F to +176 F
- Shipping and Storage Temperature Range (C) : -30 C to +80 C
- Approvals, CE : 89/336/ECC, 73/23/EEC
- Approvals, Canadian Underwriters Laboratories Inc. : cUL C22.2 No. 24-93
- Ambient Temperature Range (F) : -5 F to +140 F
- Ambient Temperature Range (C) : -20 C to +60 C
- Approvals, C-Tick : N314
- Environmental, Electrical or Ingress Protection Rating : NEMA 2, IP54
- Maximum Noise Rating : Driving (dB(A) @ 1m)-- 35
- Stroke : 95 ±3 degrees
- Shaft Dimensions (in.) : 1/4 to 1/2 in. square or 3/8 to 5/8 in. round
- Actuator Type : Damper, Valve
- Control Signal : Floating, (0)2-10 Vdc (4-20 mA w/500 ohm resistor), On/Off, SPDT
- Fail Safe Mode : Non-Spring Return
- Torque Rating (lb-in.) : 88 lb-in.
- Torque Rating (Nm) : 10 Nm
- Additional Torque Ratings (lb-in.) : Maximum Stall-- 130 lb-in.
- Additional Torque Ratings (Nm) : Maximum Stall-- 15 Nm
- External Auxiliary Switches Available : Yes, SSW2-1M
- Rotation to Open : By switch
- Rotational Stroke Adjustment : Dual Integral Adj. Stops (3 degree increments)
- Timing, Nominal : Driving @ 60 Hz-- 95 sec
- Feedback : (0)2-10 Vdc (max. output: ±1.0 mA)
- Shaft Adapter Type : U-bolt clamp
- Manual operation : Declutch mechanism
- Shaft Dimensions (mm) : 6 to 13 mm square or 8 to 16 mm round
