- Application : HVAC
- Dimensions (in.) : 9.72 in high x 3.94 in wide x 2.95 in deep
- Dimensions (mm) : 247 mm high x 100 mm wide x 75 mm deep
- Weight (lb) : 6 lb
- Weight (kg) : 2.72 kg
- Comments : Integral 1/2 in. NPSM conduit connection.
- Item Type : Product
- Mounting : Direct Coupled
- Frequency : 50 Hz, 60 Hz
- Approvals, Underwriters Laboratories Inc. : UL873, Plenum Rated
- Electrical Connections : Enclosed screw terminal strip (22 to 14 AWG)
- Operating Humidity Range (% RH) : 5 to 95% RH, non-condensing
- Supply Voltage : 24 Vac or Vdc
- Power Consumption : Driving-- 14 VA, Holding-- 5 VA
- Shipping and Storage Temperature Range (F) : .-40 F to +158 F
- Shipping and Storage Temperature Range (C) : .-40 C to +70 C
- Approvals, CE : 89/336/ECC, 73/23/EEC89/336/ECC, 73/23/EEC
- Approvals, Canadian Underwriters Laboratories Inc. : cUL C22.2 No. 24-93
- Ambient Temperature Range (F) : .-40 F to +140 F
- Ambient Temperature Range (C) : .-40 C to +60 C
- Switch Ratings : 250 Vac, 5 A res
- Approvals, C-Tick : N314
- Environmental, Electrical or Ingress Protection Rating : NEMA 2
- Internal Auxiliary Switch : 2
- Maximum Noise Rating : Driving (dB(A) @ 1m)-- 40, Holding (dB(A) @ 1m)-- 20 (no audible noise)
- Stroke : 95 ±3 degrees
- Shaft Dimensions (in.) : 3/8 to 1.06 in. round or 3/8 to 11/16 in. square
- Actuator Type : Damper, Valve
- Control Signal : Sylk-enabled
- Fail Safe Mode : Spring Return
- Torque Rating (lb-in.) : 88 lb-in.
- Torque Rating (Nm) : 10 Nm
- Spring Return Torque/Force (lb-in., lbf) : 88 lb-in.
- Spring Return Torque/Force (Nm, N) : 10 Nm
- Additional Torque Ratings (lb-in.) : Maximum Stall-- 150 lb-in.
- Additional Torque Ratings (Nm) : Maximum Stall-- 17 Nm
- External Auxiliary Switches Available : Yes, SW2-US
- Rotation to Open : By switch
- Rotational Stroke Adjustment : Mechanically limited 5 degree increments
- Timing, Nominal : Driving @ 60 Hz-- 90 sec
- Spring Return Timing : Maximum-- 20 sec
- Feedback : Sylk-enabled
- Shaft Adapter Type : Self-centering clamping
- Manual operation : Manual crank
- Shaft Dimensions (mm) : 10 to 27 mm round or 10 to 18 mm square
- Spring Return Direction : By orientation