MS7103A1021/U

Application :

HVAC

Dimensions (in.) :

7.5 in. high x 3.266 in. wide x 3.54 in deep

Dimensions (mm) :

191 mm high x 83 mm wide x 90 mm deep

Includes :

Mounting bracket, self-centering shaft adapter

Weight (lb) :

1.7

Weight (kg) :

0.78

Materials :

Plastic housing

Comments :

Integral 1/2 in. NPSM conduit connection.

Item Type :

Product

Mounting :

Direct Coupled

Frequency :

50 Hz, 60 Hz

Approvals, Underwriters Laboratories Inc. :

UL60730 /IEC 60730-1 and Part 2"“14/ UL1097 for Double Insulation/

Approvals, Canadian Standards Association :

Electrical Connections :

Wired

Operating Humidity Range (% RH) :

5 to 95% RH, non-condensing

Supply Voltage :

24 Vac or Vdc

Power Consumption :

Driving-- 4 VA, Holding-- 2 VA

Operating Temperature Range (F) :

14 F to 150 F

Operating Temperature Range (C) :

-10 C to +65C

Shipping and Storage Temperature Range (F) :

-40 F to +150 F

Shipping and Storage Temperature Range (C) :

-40 C to +65 C

Approvals, CE :

CE Certification Low Voltage Directive 2006/95/EC / CE EMC 2004/108/EC /

Approvals, Canadian Underwriters Laboratories Inc. :

Ambient Temperature Range (F) :

-40 F to +150 F

Ambient Temperature Range (C) :

-40 C to +65 C

Environmental, Electrical or Ingress Protection Rating :

NEMA 2 / IP54

Internal Auxiliary Switch :

Maximum Noise Rating :

Driving (dB(A) @ 1m)-- 40, Holding (dB(A) @ 1m)-- 20 (no audible noise)

Stroke :

95 ±3 degrees

Shaft Dimensions (in.) :

3/8 to 5/8 in. round or 1/4 to 1/2 in. square

Actuator Type :

Damper, Valve

Control Signal :

2-10 Vdc (4-20 mA w/500 ohm resistor)

Fail Safe Mode :

Spring Return

Torque Rating (lb-in.) :

27 lb-in

Torque Rating (Nm) :

3Nm

Spring Return Torque/Force (lb-in., lbf) :

27 lb-in

Spring Return Torque/Force (Nm, N) :

3Nm

Additional Torque Ratings (lb-in.) :

Maximum Stall-- 110 lb-in.

Additional Torque Ratings (Nm) :

Maximum Stall-- 12 Nm

External Auxiliary Switches Available :

No

Rotational Stroke Adjustment :

Mechanically limited maximum stroke in 7.5 degree increments

Cable :

Timing, Nominal :

Driving -- 90 sec

Spring Return Timing :

25 sec

Feedback :

No

Shaft Adapter Type :

Self-centering adapter

Shaft Dimensions (mm) :

9 to 16 mm round or 6 to 13 mm square

Spring Return Direction :

By orientation

Input Impedance :

Min. 95 kOhm

Electrical Connections (in.) :

36 in.

Electrical Connections (mm) :

0.9 m

PDF3 :

https://customer.honeywell.com/resources/Techlit/TechLitDocuments/31-00000s/31-00141M.pdf

PDF4 :

https://customer.honeywell.com/resources/Techlit/TechLitDocuments/38-00000s/38-00089EFSGRTA.pdf

PDF5 :

https://customer.honeywell.com/resources/Techlit/TechLitDocuments/31-00000s/31-00141.pdf