- Application : HVAC
- Dimensions (in.) : 7.5 in. high x 3.266 in. wide x 3.54 in deep
- Dimensions (mm) : 191 mm high x 83 mm wide x 90 mm deep
- Materials : Plastic housing
- Comments : Integral 1/2 in. NPSM conduit connection.
- Item Type : Product
- Mounting : Direct Coupled
- Frequency : 50 Hz, 60 Hz
- Approvals, Underwriters Laboratories Inc. : UL60730 /IEC 60730-1 and Part 2"“14/ UL1097 for Double Insulation/
- Electrical Connections : Wired
- Operating Humidity Range (% RH) : 5 to 95% RH, non-condensing
- Supply Voltage : 24 Vac or Vdc
- Power Consumption : Driving-- 4 VA, Holding-- 2 VA
- Shipping and Storage Temperature Range (F) : -40 F to +150 F
- Shipping and Storage Temperature Range (C) : -40 C to +65 C
- Ambient Temperature Range (F) : -40 F to +150 F
- Ambient Temperature Range (C) : -40 C to +65 C
- Environmental, Electrical or Ingress Protection Rating : NEMA 2 / IP54
- Maximum Noise Rating : Driving (dB(A) @ 1m)-- 40, Holding (dB(A) @ 1m)-- 20 (no audible noise)
- Stroke : 95 ±3 degrees
- Shaft Dimensions (in.) : 3/8 to 5/8 in. round or 1/4 to 1/2 in. square
- Actuator Type : Damper, Valve
- Control Signal : 2-10 Vdc (4-20 mA w/500 ohm resistor)
- Fail Safe Mode : Spring Return
- Torque Rating (lb-in.) : 27 lb-in
- Torque Rating (Nm) : 3Nm
- Spring Return Torque/Force (lb-in., lbf) : 27 lb-in
- Spring Return Torque/Force (Nm, N) : 3Nm
- Additional Torque Ratings (lb-in.) : Maximum Stall-- 110 lb-in.
- Additional Torque Ratings (Nm) : Maximum Stall-- 12 Nm
- External Auxiliary Switches Available : No
- Rotational Stroke Adjustment : Mechanically limited maximum stroke in 7.5 degree increments
- Timing, Nominal : Driving -- 90 sec
- Spring Return Timing : 25 sec
- Feedback : Yes
- Shaft Adapter Type : Self-centering adapter
- Shaft Dimensions (mm) : 9 to 16 mm round or 6 to 13 mm square
- Spring Return Direction : By orientation
- Input Impedance : Min. 95 kOhm
- Electrical Connections (in.) : 36 in.
- Electrical Connections (mm) : 0.9 m
