An E/P Transducer accepts a proportional voltage signal from an electronic controller and converts it into a proportional pneumatic signal of 0.2 to 1.0 bar to operate pneumatic actuators or reset pneumatic controllers. The RP7517A accepts a 2...10 Vdc"|Electronic Pneumatic Transducer: Powered by Control Signal: 2 7/16in Wide: 3 3/8in High: 1 7/8in Deep
- Maximum Lead Length : 30inch
- Maximum Lead Connection Size : 22AWG
- Overall Depth : 1.875in; 47.625mm
- Air Connections Outer Diameter : 1/4in; 6.35mm
- Brand : Honeywell
- Maximum Transducer Output : 103kilopascal; 15pounds per square inch
- Air Connection Type : Dual Barb-Fitting
- Maximum Transducer Input : 2 - 10voltage direct current; 10voltage direct current
- Nominal High End Pressure : 16 psi @ 11 ( min. )voltage direct current; 16 psi with 18 psi (Main Pressure) @ 12
- Minimum Transducer Output : 3pounds per square inch; 21kilopascal
- Maximum Operating Pressure : 30pounds per square inch; 205kilopascal
- For Use With : Electronic-Pneumatic Systems
- Transducer Output Type : Pressure
- Nominal Low End Pressure : 0.034bar; 0.5psi
- Maximum Operating Ambient Temperature : 131degree Fahrenheit; 55degree Celsius
- Minimum Operating Ambient Temperature : 41degree Fahrenheit; 5degree Celsius
- Minimum Transducer Input : 2 - 10voltage direct current; 2voltage direct current
- Overall Height : 3.375in; 85.725mm
- Overall Width : 61.8998mm; 2.437in
- Minimum Lead Connection Size : 14AWG
- Terminal Type : Screw Terminal
- Mounting Type : DIN Rail
- Current Draw : 16mA
- Input Voltage : 2 to 10V DC
- Operating temperature Range : 41 to 131°F; 5 to 55°C
- Pressure Range : 0 to 18psi; 0 to 1.24bar