The RPM range of power relays has relays from 1 to 4 poles with 15A contact rating. There is a good selection of relays sockets and accessories to choose from. This 2 pole relay has two CO contacts. Each contact has a common point and one normally ope and one normally closed contact. Contacts have UL operational current ratings of 15 A at 277 Vac and 15 A at 28 VDC. This relay is designed to be pluged into a relay socket. All wiring is connect to the relay socket terminals. Relay has a 24 VAC 50/60 Hz coil. This relay has a bipolar LED to indicate the relay status. Relay is UL Listed when a RPZ relay socket is used. Relay is also CSA certified. Transient protection modules and hold down clips are available for this relay. Relay is UL Listed when a RPZ relay socket is used. Relay is also CSA certified. The Harmony electromechanical relay features flexible add-on accessories like protection module, timing module, maintaining clamp and marking legend. The Harmony electromechanical relay includes interface, miniature and power relays from 1 CO to 4 CO contacts, up to 30A.
- Range of Product : Harmony Electromechanical Relays
- Series name : Power
- Product or Component Type : Plug-in relay
- Device short name : RPM
- Contacts type and composition : 2 C/O
- [Uc] control circuit voltage : 24 V AC 50/60 Hz
- [Ithe] conventional enclosed thermal current : 15 A -40…131 °F (-40…55 °C)
- Status LED : With
- control type : Without lockable test button
- Utilisation coefficient : 20 %
- Shape of pin : Flat
- [Ui] rated insulation voltage : 250 V IEC, 300 V CSA, 300 V UL
- [Uimp] rated impulse withstand voltage : 4 kV 1.2/50 µs
- Contacts material : AgNi
- [Ie] rated operational current : 15 A 277 V AC) UL, 15 A 28 V DC) UL, 15 A 250 V AC) NO IEC, 15 A 28 V DC) NO IEC, 7.5 A 250 V AC) NC IEC, 7.5 A 28 V DC) NC IEC
- Maximum switching voltage : 250 V IEC
- Resistive load current : 15 A 250 V AC, 15 A 28 V DC
- Maximum switching capacity : 3750 VA, 420 W
- Minimum switching capacity : 170 mW 10 mA, 17 V
- Operating rate : <= 1200 cycles/hour under load, <= 18000 cycles/hour no-load
- Mechanical durability : 10000000 cycles
- Electrical durability : 100000 cycles resistive
- Average coil consumption in VA : 1.1 60 Hz
- Drop-out voltage threshold : >= 0.15 Uc AC
- Operate time : 20 ms at nominal voltage
- Release time : 20 ms at nominal voltage
- Average coil resistance : 177 Ohm at 68 °F (20 °C) +/- 15 %
- Rated operational voltage limits : 19.2...26.4 V AC
- Protection category : RT I
- Test levels : Level A group mounting
- Operating position : Any position
- Pollution degree : 3
- Safety reliability data : B10d = 100000
- Width : 0.83 in (21 mm)
- Height : 1.06 in (27 mm)
- Depth : 1.54 in (39 mm)
- Net Weight : 0.08 lb(US) (0.036 kg)
- device presentation : Complete product
- Standards : CSA C22.2 No 14, UL 508, EN/IEC 61810-1
- Product Certifications : EAC, CSA, UL
- Ambient Air Temperature for Storage : -40…185 °F (-40…85 °C)
- Ambient air temperature for operation : -40…131 °F (-40…55 °C)
- Degree of protection (Housing only) : IP40 conforming to EN/IEC 60529
- Shock resistance : 15 gnin operation, 30 gnnot operating
- Category : US10CP221127
- Discount Schedule : 0CP2
- GTIN : 3389119217972
- Returnability : Yes
- Country of origin : CN
- Unit Type of Package 1 : PCE
- Number of Units in Package 1 : 1
- Package 1 Height : 0.87 in (2.2 cm)
- Package 1 Width : 1.10 in (2.8 cm)
- Package 1 Length : 1.89 in (4.8 cm)
- Package 1 Weight : 1.31 oz (37 g)
- Unit Type of Package 2 : BB1
- Number of Units in Package 2 : 10
- Package 2 Height : 1.34 in (3.4 cm)
- Package 2 Width : 4.09 in (10.4 cm)
- Package 2 Length : 4.92 in (12.5 cm)
- Package 2 Weight : 14.18 oz (402 g)
- Unit Type of Package 3 : S01
- Number of Units in Package 3 : 120
- Package 3 Height : 5.91 in (15 cm)
- Package 3 Width : 5.91 in (15 cm)
- Package 3 Length : 15.75 in (40 cm)
- Package 3 Weight : 11.22 lb(US) (5.088 kg)
- Warranty : 18 months