Overview
Cartridge Globe Valves control hot and chilled water for VAV terminals fan coil units, small re-heaters and re-coolers in temperature controllers. Use with M6410 and M7410 Actuator. 1/2" & 3/4" size fit with the M6435 M7435, and the MP958 Actuators.
Features
Long stroke allows wider range of control.Soft valve seat provides low leakage rate.Inserts for 1/2 in. and 3/4 in. valves are changeable without draining valve when used with an insert replacement tool.Brass body and Stainless Steel stem.Threaded plastic cover/manual handle allows manual operation.Easily installed in areas where space is limited.
- Maximum Safe Operating Pressure (psi) : 235 psi
- Maximum Safe Operating Pressure (kPa) : 1620 kPa
- Used With : M6410A3017, M7410F3006, M6435A3000, M7435F3007
- Ambient Temperature Range (F) : 36 F to 230 F
- Ambient Temperature Range (C) : 2 C to 110 C
- Connection Type : Female NPT
- Body Pattern : Two-way
- Pipe Size (inch) : 1 1/4 in.
- Pipe Size (DN) : DN32
- Maximum Differential Pressure Ratings (Close-off) (psi) : 174 psi
- Maximum Differential Pressure Ratings (Close-off) (kPa) : 1200 kPa
- Capacity (Cv) : 18 Cv
- Capacity (Kv) : 15.6 kvs
- Valve Action : Stem up to close
- Valve Type : Cartridge Globe Valve
- Controlled Fluid : Chilled or hot water with up to 50% Glycol. Not for use with steam or fuels.
- Materials (Body) : Brass
- Materials (Seat) : Brass
- Materials (Stem) : Stainless Steel
- Materials (Cartridge) : Brass
- Flow Characteristic : Linear
- Actuation : Must be purchased separately
- Stem Travel (in.) : 1/4 in.
- Stem Travel (mm) : 6.4 mm
- Materials (Plug/Ball/Disc) : Brass
- Leakage : ANSI Class III (less than 0.02% of Cv)