zoom

Product pictures shown represent the general type of component listed.The product you select might not exactly match the photo.

ATV630D11N4

$3,219.31
(No reviews yet) Write a Review
SKU:
ATV630D11N4
Adding to cart… The item has been added
Variable Speed Drive ATV630|Wall Mount|Supply Frequency: 50...60 Hz - 5...5 %|Us Rated Supply Voltage: 380...480 V - 15...10 % |171mm W x 409mm H x 233mm D
Brand :
Schneider Electric
By Schneider :
Yes
California proposition 65 :
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
capacity of DC link :
1000.0 µF
Carbon footprint (kg CO2 eq, Total Life cycle) :
10474
Communication Port Protocol :
Ethernet
Communication Port Protocol :
Modbus serial
Communication Port Protocol :
Modbus TCP
computer port :
Yes
Connector Type :
RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
Connector Type :
RJ45 on the remote graphic terminal)Modbus serial
continuous output current :
16.5 A 4 kHz heavy duty
continuous output current :
23.5 A 4 kHz normal duty
data format :
8 bits, configurable odd, even or no parity
degree of protection :
UL type 1 UL 508C
Depth :
9.2 in (233 mm)
design of frequency changer :
U converter
Device Short Name :
ATV630
discrete and process manufacturing :
Building - HVAC Compressor centrifugal
discrete and process manufacturing :
Building - HVAC Screw compressor
discrete and process manufacturing :
Food and beverage processing Atomization
discrete and process manufacturing :
Food and beverage processing Fan
Local Signalling :
1 LED (red) for presence of voltage
Local Signalling :
3 LEDs (dual colour) for embedded communication status
motor slip compensation :
Automatic whatever the load
motor slip compensation :
Can be suppressed
motor slip compensation :
Not available in permanent magnet motor law
motor starter type :
Variable speed drive
Mounting Mode :
Wall mount
NEMA Protection Rating :
NEMA 1
Net Weight :
17.0 lb(US) (7.7 kg)
Network Frequency :
50-60 Hz
noise level :
56 dB
noise level :
56 dB 86/188/EEC
nominal output current :
23.5 A
Nominal Output Power :
11.0 kW
nominal switching frequency :
4 kHz
number of addresses :
1-247 Modbus serial
number of HW interfaces industrial Ethernet :
1
number of HW interfaces other :
0
number of HW interfaces parallel :
0
number of HW interfaces PROFINET :
0
number of HW interfaces serial RS232 :
0
number of HW interfaces serial RS422 :
0
number of HW interfaces serial RS485 :
1
number of HW interfaces serial TTY :
0
number of HW interfaces USB :
0
number of input phases :
3
number of inputs, bidirectional, not potential-fre :
0
number of inputs, potential-free :
0
number of output phases :
3
Number of Units in Package 2 :
3
Operating Altitude :
1000...4800 m with current derating 1 % per 100 m
operating element present :
Yes
operating position :
Vertical +/- 10 degree
optical interface present :
No
option card :
communication module, Ethernet Powerlink
option card :
Communication module, BACnet MS/TP
option card :
Slot A communication module, CANopen daisy chain RJ45
option card :
Slot A communication module, CANopen screw terminals
option card :
Slot A communication module, CANopen SUB-D 9
option card :
Slot A communication module, DeviceNet
option card :
Slot A communication module, Ethernet IP/Modbus TCP/MD-Link
option card :
Slot A communication module, Modbus TCP/EtherNet/IP
option card :
Slot A communication module, Profibus DP V1
option card :
Slot A communication module, Profinet
option card :
Slot A/slot B digital and analog I/O extension module
option card :
Slot A/slot B output relay extension module
Overvoltage Category :
III
Package 2 GTIN :
73606480758163
Package 2 Height :
29.53 in (75.000 cm)
Package 2 Length :
31.50 in (80.000 cm)
Package 2 Weight :
97.888 lb(US) (44.401 kg)
Package 2 width :
23.62 in (60.000 cm)
Packaging made with recycled cardboard :
Yes
Packaging without single use plastic :
Yes
permissible temporary current boost :
1.1 x In 60 s normal duty)
permissible temporary current boost :
1.5 x In 60 s heavy duty)
permitted relative humidity (during operation) :
Class 3K5 according to EN 60721-3
permitted relative humidity (during storage) :
Class 1K5 according to EN 60721-3
permitted relative humidity (during transport) :
Class 2K5 according to EN 60721-3
Phase :
3 phase
Physical Interface :
2-wire RS 485
Physical Interface :
Ethernet
Pollution Degree :
2
Pollution Degree :
2 IEC 61800-5-1
power dissipation in W :
Forced convection 255 W 380 V 4 kHz
power dissipation in W :
Natural convection 51 W 380 V 4 kHz
power loss per device current dependent :
349.0 W
power loss static current independent :
17.0 W
power range :
7-11 kW 380-440 V 3 phase
power range :
7-11 kW 480-500 V 3 phase
Product Certifications :
ATEX INERIS
Product Certifications :
ATEX zone 2/22
Product Certifications :
CSA
Product Certifications :
DNV-GL
Product Certifications :
TÃœV
Product Certifications :
UL
Product contributes to saved and avoided emissions :
Yes
Product Destination :
Asynchronous motors
Product Destination :
Synchronous motors
Product Or Component Type :
Variable speed drive
Product Specific Application :
Process and utilities
prospective line Isc :
50 kA
Protection Type :
Break on the control circuit drive
Protection Type :
Line supply overvoltage drive
Protection Type :
Line supply phase loss drive
Protection Type :
Line supply undervoltage drive
Protection Type :
Motor phase break drive
Protection Type :
Motor phase break motor
Protection Type :
Overcurrent between output phases and earth drive
Protection Type :
Overheating drive
Protection Type :
Overload of output voltage drive
Protection Type :
Overspeed drive
Protection Type :
Overvoltages on the DC bus drive
Protection Type :
Safe torque off drive
Protection Type :
Safe torque off motor
Safety Function :
STO (safe torque off) SIL 3
sampling duration :
10 ms +/- 1 ms AO1) - analog output
sampling duration :
2 ms +/- 0.5 ms DI1...DI4) - discrete input
sampling duration :
5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input
sampling duration :
5 ms +/- 1 ms DI5, DI6) - discrete input
SCIP Number :
1c05d307-8212-426b-a56b-addc96693166
shock resistance :
15 gn 11 ms IEC 60068-2-27
specific application :
Utility
speed drive output frequency :
0.1-500 Hz
Standards :
IEC 13849-1
Standards :
IEC 60721-3
Standards :
IEC 61000-3-12
Standards :
IEC 61508
Standards :
UL 508C
Standards :
EN/IEC 61800-3 environment 2 category C3
Standards :
Environment 1 category C2 IEC 61800-3
Standards :
Environment 2 category C3 IEC 61800-3
Standards :
IEC 61800-3
Standards :
IEC 61800-3 environment 1 category C2
Standards :
IEC 61800-5-1
Supply :
External supply for digital inputs 24 V DC 19-30 V)
Supply :
Internal supply for digital inputs and STO 24 V DC 21-27 V)
Supply :
Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %
Supply Frequency :
50...60 Hz - 5...5 %
supporting protocol for ASI :
No
supporting protocol for AS-Interface Safety at Wor :
No
supporting protocol for BACnet :
No
supporting protocol for CAN :
Yes
supporting protocol for Data-Highway :
No
supporting protocol for DeviceNet :
No
supporting protocol for DeviceNet Safety :
No
supporting protocol for EtherNet/IP :
Yes
supporting protocol for Foundation Fieldbus :
No
supporting protocol for INTERBUS :
No
supporting protocol for INTERBUS-Safety :
No
supporting protocol for KNX :
No
supporting protocol for LON :
No
supporting protocol for MODBUS :
Yes
supporting protocol for other bus systems :
No
supporting protocol for PROFIBUS :
Yes
supporting protocol for PROFINET CBA :
Yes
supporting protocol for PROFINET IO :
Yes
supporting protocol for PROFIsafe :
No
supporting protocol for SafetyBUS P :
No
supporting protocol for SERCOS :
No
supporting protocol for SUCONET :
No
supporting protocol for TCP/IP :
Yes
Switching Frequency :
2...12 kHz adjustable
Switching Frequency :
4...12 kHz with derating factor
synchronous motor control profile :
Permanent magnet motor
synchronous motor control profile :
Synchronous reluctance motor
Take-back :
No
Temperature Ambient Operating Range :
5-140 °F (-15-60 °C)
Temperature Shipping and Storage Range :
-40-158 °F (-40-70 °C)
transmission frame :
RTU
Transmission Rate :
10, 100 Mbits
Transmission Rate :
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
type of cooling :
Forced convection
type of polarization :
No impedance
Unit Type of Package 2 :
P06
UNSPSC Classification v19 :
39122001
UNSPSC Classification v23 :
39122001
variant :
Standard version
vibration resistance :
1 gn (f= 13-200 Hz) conforming to IEC 60068-2-6
vibration resistance :
1.5 mm peak to peak (f= 2-13 Hz) conforming to IEC 60068-2-6
volume of cooling air :
27210.2 Gal/hr(US) (103 m3/h)
Volume of Package 2 :
360000.000 cm3
Width :
6.7 in (171 mm)
with safety function Safe brake management (SBC/SB :
No
with safety function Safe Direction (SDI) :
No
with safety function Safe Operating Stop (SOS) :
No
with safety function Safe Position (SP) :
No
with safety function Safe programmable logic :
No
with safety function Safe Speed Monitor (SSM) :
No
with safety function Safe Stop 1 (SS1) :
No
with safety function Safe torque off (STO) :
Yes
with safety function Safely Limited Position (SLP) :
No
with safety function Safely Limited Speed (SLS) :
No
with sft fct Safe Stop 2 (SS2) :
No
PDF :
https://iportal2.schneider-electric.com/Contents/docs/SQD-630%20CATALOG.PDF

No Reviews Yet

Write a Review