Variable Speed Drive ATV630|Wall Mount|Supply Frequency: 50...60 Hz - 5...5 %|Us Rated Supply Voltage: 200...240 V - 15...10 %|26mm W x 673mm H x 271mm D
- Brand : Schneider Electric
- By Schneider : Yes
- capacity of DC link : 4920.0 µF
- Carbon footprint (kg CO2 eq, Total Life cycle) : 26525
- Communication Port Protocol : Ethernet
- Communication Port Protocol : Modbus serial
- Communication Port Protocol : Modbus TCP
- computer port : Yes
- Connector Type : RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
- Connector Type : RJ45 on the remote graphic terminal)Modbus serial
- continuous output current : 63.4 A 4 kHz heavy duty
- continuous output current : 78.4 A 4 kHz normal duty
- data format : 8 bits, configurable odd, even or no parity
- degree of protection : UL type 1 UL 508C
- Depth : 10.7 in (271 mm)
- design of frequency changer : U converter
- Device Short Name : ATV630
- discrete and process manufacturing : Building - HVAC Compressor centrifugal
- discrete and process manufacturing : Building - HVAC Screw compressor
- discrete and process manufacturing : Food and beverage processing Atomization
- discrete and process manufacturing : Food and beverage processing Fan
- Global Keywords : 15kw speed drive
- Global Keywords : 18.5kw speed drive
- Global Keywords : 200 to 240vac speed drive
- Global Keywords : 20hp speed drive
- Global Keywords : 25hp speed drive
- Global Keywords : 3 phase speed drive
- Global Keywords : Ac speed drive
- Global Keywords : Adjustable speed drive
- Global Keywords : Altivar process atv600 drive
- Global Keywords : ATV600
- Global Keywords : Heavy duty
- Global Keywords : Ip21 speed drive
- Global Keywords : Low voltage speed drive
- Global Keywords : Normal duty
- Global Keywords : Schneider
- Global Keywords : Schneider electric
- Global Keywords : Se
- Global Keywords : Speed drive
- Global Keywords : UL type 1
- Global Keywords : Variable frequency drive
- Global Keywords : Variable speed drive
- Global Keywords : Vsd for asynchronous motor
- Global Keywords : Vsd for synchronous motor
- Global warming ; Total life cycle? : 26 525 kg CO2 eq.
- Height : 26.5 in (673 mm)
- housing material : Plastic
- input compatibility : DI1...DI6 discrete input level 1 PLC IEC 61131-2
- input compatibility : DI5, DI6 discrete input level 1 PLC IEC 65A-68
- input compatibility : STOA, STOB discrete input level 1 PLC IEC 61131-2
- insulation resistance : > 1 MOhm 500 V DC for 1 minute to earth
- IP Degree of Protection : IP21
- IP Degree of Protection : IP21IEC 60529
- IP Degree of Protection : IP21IEC 61800-5-1
- isolation : Between power and control terminals
- line current : 44.9 A 240 V heavy duty)
- maximum acceleration under vibratory load (during : 10 m/s² at 13...200 Hz
- maximum associated fuse rating : 125.0 A
- maximum deflection under vibratory load (during op : 1.5 mm at 2...13 Hz
- maximum deflection under vibratory load (during st : 1.5 mm at 2...13 Hz
- maximum deflection under vibratory load (during tr : 1.5 mm at 2...13 Hz
- Maximum Horse Power Rating : 20 hp heavy duty
- Maximum Horse Power Rating : 25 hp normal duty
- Maximum Input Current per phase : 66.7 A
- maximum output frequency : 500 kHz
- maximum output voltage : 240.0 V
- Maximum Switching Current : Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC
- Maximum Switching Current : Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC
- Maximum Switching Current : Relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC
- Maximum Switching Current : Relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC
- maximum transient current : 86.2 A 60 s normal duty)
- maximum transient current : 95.1 A 60 s heavy duty)
- Packaging without single use plastic : No
- permissible temporary current boost : 1.1 x In 60 s normal duty)
- permissible temporary current boost : 1.5 x In 60 s heavy duty)
- permitted relative humidity (during operation) : Class 3K5 according to EN 60721-3
- permitted relative humidity (during storage) : Class 1K5 according to EN 60721-3
- permitted relative humidity (during transport) : Class 2K5 according to EN 60721-3
- Product Certifications : ATEX INERIS
- Product Certifications : ATEX zone 2/22
- Product Certifications : CSA
- Product Certifications : DNV-GL
- Product Certifications : TÃœV
- Product Certifications : UL
- Product contributes to saved and avoided emissions : Yes
- Product Destination : Asynchronous motors
- Product Destination : Synchronous motors
- Product Or Component Type : Variable speed drive
- Product Specific Application : Process and utilities
- prospective line Isc : 50 kA
- Protection Type : Break on the control circuit drive
- Protection Type : Line supply overvoltage drive
- Protection Type : Line supply phase loss drive
- Protection Type : Line supply undervoltage drive
- Protection Type : Motor phase break drive
- Protection Type : Motor phase break motor
- Protection Type : Overcurrent between output phases and earth drive
- Protection Type : Overheating drive
- Protection Type : Overload of output voltage drive
- Protection Type : Overspeed drive
- Protection Type : Overvoltages on the DC bus drive
- Protection Type : Safe torque off drive
- Protection Type : Safe torque off motor
- Protection Type : Short-circuit protection drive
- Protection Type : Thermal protection drive
- Protection Type : Thermal protection motor
- Quantity Per Set : 1
- refresh time : Relay output R1, R2, R3)5 ms +/- 0.5 ms)
- Regulation Loop : Adjustable PID regulator
- Relative Humidity : 5-95 % without condensation IEC 60068-2-3
- relative symmetric mains voltage tolerance : 10 %
- relative symmetric network frequency tolerance : 5 %
- relay output number : 3
- relay output type : Configurable relay logic R1 fault relay NO/NC 100000 cycles
- relay output type : Configurable relay logic R2 sequence relay NO 100000 cycles
- relay output type : Configurable relay logic R3 sequence relay NO 100000 cycles
- Safety Function : STO (safe torque off) SIL 3
- sampling duration : 10 ms +/- 1 ms AO1) - analog output
- sampling duration : 2 ms +/- 0.5 ms DI1...DI4) - discrete input
- sampling duration : 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input
- sampling duration : 5 ms +/- 1 ms DI5, DI6) - discrete input
- SCIP Number : 8ac43dc1-9e7e-4e1a-a3ee-665587b07cd7
- shock resistance : 15 gn 11 ms IEC 60068-2-27
- specific application : Utility
- speed drive output frequency : 0.1-500 Hz
- Standards : IEC 13849-1
- Standards : IEC 60721-3
- Standards : IEC 61000-3-12
- Standards : IEC 61508
- Standards : UL 508C
- Standards : EN/IEC 61800-3 environment 2 category C3
- Standards : Environment 1 category C2 IEC 61800-3
- Standards : Environment 2 category C3 IEC 61800-3
- Standards : IEC 61800-3
- Standards : IEC 61800-3 environment 1 category C2
- Standards : IEC 61800-5-1
- Supply Frequency : 50...60 Hz - 5...5 %
- supporting protocol for ASI : No
- supporting protocol for AS-Interface Safety at Wor : No
- supporting protocol for BACnet : No
- supporting protocol for CAN : Yes
- supporting protocol for Data-Highway : No
- supporting protocol for DeviceNet : No
- supporting protocol for DeviceNet Safety : No
- supporting protocol for EtherNet/IP : Yes
- supporting protocol for Foundation Fieldbus : No
- supporting protocol for INTERBUS : No
- supporting protocol for INTERBUS-Safety : No
- supporting protocol for KNX : No
- supporting protocol for LON : No
- supporting protocol for MODBUS : Yes
- supporting protocol for other bus systems : No
- supporting protocol for PROFIBUS : Yes
- supporting protocol for PROFINET CBA : Yes
- supporting protocol for PROFINET IO : Yes
- supporting protocol for PROFIsafe : No
- supporting protocol for SafetyBUS P : No
- supporting protocol for SERCOS : No
- supporting protocol for SUCONET : No
- supporting protocol for TCP/IP : Yes
- Switching Frequency : 2...12 kHz adjustable
- Switching Frequency : 4...12 kHz with derating factor
- synchronous motor control profile : Permanent magnet motor
- synchronous motor control profile : Synchronous reluctance motor
- Take-back : No
- Temperature Ambient Operating Range : 5-140 °F (-15-60 °C)
- Temperature Shipping and Storage Range : -40-158 °F (-40-70 °C)
- transmission frame : RTU
- Transmission Rate : 10, 100 Mbits
- Transmission Rate : 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
- type of cooling : Forced convection
- type of polarization : No impedance
- UNSPSC Classification v19 : 39122001
- UNSPSC Classification v23 : 39122001
- variant : Standard version
- vibration resistance : 1 gn (f= 13-200 Hz) conforming to IEC 60068-2-6
- vibration resistance : 1.5 mm peak to peak (f= 2-13 Hz) conforming to IEC 60068-2-6
- volume of cooling air : 63402.4 Gal/hr(US) (240 m3/h)
- Width : 8.9 in (226 mm)
- with safety function Safe brake management (SBC/SB : No
- with safety function Safe Direction (SDI) : No
- with safety function Safe Operating Stop (SOS) : No
- with safety function Safe Position (SP) : No
- with safety function Safe programmable logic : No
- with safety function Safe Speed Monitor (SSM) : No
- with safety function Safe Stop 1 (SS1) : No
- with safety function Safe torque off (STO) : Yes
- with safety function Safely Limited Position (SLP) : No
- with safety function Safely Limited Speed (SLS) : No
- with sft fct Safe Stop 2 (SS2) : No