Altivar 212 VFD|100 HP|Continuous Output Current: 160 amps|AC Line Input Line Voltage: 380/480 VAC Three Phase Input/Output|Enclosure Rating: IP20 The Alitvar 212 drive includes: |3 logic inputs|2 analog inputs|1 analog output|2 relay outputs (with 1 NO and 1 NO/NC contacts)|Integrated 4 digit, 7-segment LED display with a 7 button keypad|RJ45 Modbus port plus a four-screw terminal block for BACnet, Modbus, Metasys N2 and Apogee P1 communication protocols|LonWorks is available in an option card
- Brand : Schneider Electric
- By Schneider : Yes
- Communication Port Protocol : APOGEE FLN
- Communication Port Protocol : BACnet
- Communication Port Protocol : LonWorks
- Communication Port Protocol : METASYS N2
- Communication Port Protocol : Modbus
- Communication Service : Monitoring inhibitable
- Communication Service : Read device identification (43)
- Communication Service : Read holding registers (03) 2 words maximum
- Communication Service : Time out setting from 0.1 to 100 s
- Communication Service : Write multiple registers (16) 2 words maximum
- Communication Service : Write single register (06)
- Connector Type : 1 open style
- Connector Type : 1 RJ45
- continuous output current : 160 A 380 V
- continuous output current : 160 A 460 V
- data format : 8 bits, 1 stop, odd even or no configurable parity
- Depth : 11.4 in (290 mm)
- Device Short Name : ATV212
- dielectric strength : 3535 V DC between earth and power terminals
- dielectric strength : 5092 V DC between control and power terminals
- Discrete Input Type : RES programmable 24 V DC level 1 PLC 4700 Ohm
- Discrete Output Number : 2
- Discrete Output Type : Configurable relay logic FLA, FLC) NO - 100000 cycles
- Discrete Output Type : Configurable relay logic FLB, FLC) NC - 100000 cycles
- Discrete Output Type : Configurable relay logic RY, RC) NO - 100000 cycles
- Electrical Connection : L1/R, L2/S, L3/T terminal 0.2 in² (150 mm²) 300 kcmil)
- Electrical Connection : VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.004 in² (2.5 mm²) / AWG 14
- Electromagnetic Compatibility : 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
- Electromagnetic Compatibility : Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
- Electromagnetic Compatibility : Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
- Electromagnetic Compatibility : Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
- Electromagnetic Compatibility : Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
- Electromagnetic Compatibility : Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
- EMC filter : Class C2 EMC filter integrated
- Environmental Characteristic : Classes 3C1 conforming to IEC 60721-3-3
- Environmental Characteristic : Classes 3S2 conforming to IEC 60721-3-3
- Final Result for Connectable : Connectable ready
- Final Result for Flywheel performance tracking : Connectable products
- frequency resolution : Analog input 0.024/50 Hz
- frequency resolution : Display unit 0.1 Hz
- functionality : Mid
- Global Keywords : 3 phase speed drive
- Global Keywords : 380 to 480vac speed drive
- Global Keywords : Ac dc drive
- Global Keywords : Ac drive
- Global Keywords : Ac motor inverte
- Global Keywords : Ac speed drive
- Global Keywords : Adjustable speed drive
- Global Keywords : Altivar
- Global Keywords : Altivar 212
- Global Keywords : Altivar machine
- Global Keywords : ATV212
- Global Keywords : Drive
- Global Keywords : Fan
- Global Keywords : Frequency inverter
- Global Keywords : HVAC
- Global Keywords : Inverte
- Global Keywords : Low voltage speed drive
- Global Keywords : Pump
- Global Keywords : Schneider
- Global Keywords : Schneider electric
- Global Keywords : Se
- Global Keywords : Simple vfd
- Global Keywords : Speed drive
- Global Keywords : Variable frequency drive
- Global Keywords : Variable speed drive
- Global Keywords : Vfd
- Global Keywords : Vsd
- Global Keywords : Vsd for asynchronous motor
- Height : 24.8 in (630 mm)
- insulation resistance : >= 1 mOhm 500 V DC for 1 minute
- IP Degree of Protection : IP20 on upper part without blanking plate on cover IEC 60529
- IP Degree of Protection : IP20 on upper part without blanking plate on cover IEC 61800-5-1
- IP Degree of Protection : IP21
- IP Degree of Protection : IP21 IEC 60529
- IP Degree of Protection : IP21 IEC 61800-5-1
- IP Degree of Protection : IP41 on upper part IEC 60529
- IP Degree of Protection : IP41 on upper part IEC 61800-5-1
- isolation : Electrical between power and control
- line current : 111.3 A 480 V
- line current : 141.8 A 380 V
- linearity error : FM +/- 0.2 % output
- linearity error : VIA +/- 0.15 % of maximum value input
- linearity error : VIB +/- 0.15 % of maximum value input
- Local Signalling : 1 LED (red) for DC bus energized
- Manufacturer : Schneider Electric
- Marking : CE
- Maximum Horse Power Rating : 100 hp
- Maximum Switching Current : 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R)
- Maximum Switching Current : 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)
- Maximum Switching Current : 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R)
- Maximum Switching Current : 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R)
- maximum transient current : 176 A 60 s
- minimum switching current : 3 mA 24 V DC configurable relay logic
- motor power kW : 75 kW
- motor slip compensation : Adjustable
- motor slip compensation : Automatic whatever the load
- motor slip compensation : Not available in voltage/frequency ratio motor control
- motor starter type : Variable speed drive
- Network Frequency : 47.5...63 Hz
- noise level : 63.7 dB 86/188/EEC
- nominal switching frequency : 8 kHz
- number of addresses : 1-247
- operating position : Vertical +/- 10 degree
- option card : Communication card LonWorks
- Packaging made with recycled cardboard : Yes
- Packaging without single use plastic : Yes
- Phase : 3 phase
- Physical Interface : 2-wire RS 485
- Pollution Degree : 3 IEC 61800-5-1
- power dissipation in W : 1945 W
- power range : 55-100 kW 380-440 V 3 phase
- power range : 55-100 kW 480-500 V 3 phase
- Product Certifications : CSA
- Product Certifications : C-tick
- Product Certifications : NOM 117
- Product Certifications : UL
- Product contributes to saved and avoided emissions : Yes
- Product Destination : Asynchronous motors
- Product Or Component Type : Variable speed drive
- Product Specific Application : Pumps and fans in HVAC
- prospective line Isc : 22 kA
- Protection Type : Against exceeding limit speed drive
- Protection Type : Against input phase loss drive
- Protection Type : Break on the control circuit drive
- Protection Type : Input phase breaks drive
- Protection Type : Line supply overvoltage and undervoltage drive
- Protection Type : Line supply undervoltage drive
- Protection Type : Motor phase break motor
- Protection Type : Overcurrent between output phases and earth drive
- Protection Type : Overheating protection drive
- Protection Type : Overvoltages on the DC bus drive
- Protection Type : Short-circuit between motor phases drive
- Protection Type : Thermal power stage drive
- Protection Type : Thermal protection motor
- Protection Type : With PTC probes motor
- Regulation Loop : Adjustable PI regulator
- Relative Humidity : 5-95 % without condensation IEC 60068-2-3
- Relative Humidity : 5-95 % without dripping water IEC 60068-2-3
- Response Time : FLA, FLC 7 ms +/- 0.5 ms discrete
- Response Time : FLB, FLC 7 ms +/- 0.5 ms discrete
- Response Time : FM 2 ms +/- 0.5 ms analog
- Response Time : RY, RC 7 ms +/- 0.5 ms discrete
- sampling duration : 2 ms +/- 0.5 ms F discrete
- sampling duration : 2 ms +/- 0.5 ms R discrete
- sampling duration : 2 ms +/- 0.5 ms RES discrete
- sampling duration : 22 ms +/- 0.5 ms VIB analog
- sampling duration : 3.5 ms +/- 0.5 ms VIA analog
- SCIP Number : B2cadac9-e4c3-4178-afa8-06179c3cbbe7
- shock resistance : 15 gn 11 ms IEC 60068-2-27
- specific application : HVAC
- speed accuracy : +/- 10 % of nominal slip 0.2 Tn to Tn
- speed drive output frequency : 0.5-200 Hz
- speed range : 1-10
- Standards : EN 55011 class A group 1
- Standards : EN 61800-3 category C3
- Standards : IEC 61800-3
- Standards : IEC 61800-3 category C2
- Standards : IEC 61800-3 category C3
- Standards : IEC 61800-3 environments 1 category C1
- Standards : IEC 61800-3 environments 1 category C2
- Standards : IEC 61800-3 environments 1 category C3
- Standards : IEC 61800-3 environments 2 category C1
- Standards : IEC 61800-3 environments 2 category C2
- Standards : IEC 61800-3 environments 2 category C3
- Standards : IEC 61800-5-1
- Standards : UL Type 1
- Supply : Internal supply 24 V DC 21-27 V)
- Supply Frequency : 50...60 Hz - 5...5 %
- supply voltage limits : 323-528 V
- Switching Frequency : 6...16 kHz adjustable
- Switching Frequency : 8...16 kHz with derating factor
- Take-back : No
- Temperature Shipping and Storage Range : -13-158 °F (-25-70 °C)
- Tightening Torque : 362.9 lbf.in (41 N.m), 360 lb.in L1/R, L2/S, L3/T)
- Tightening Torque : 5.3 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
- torque accuracy : +/- 15 %
- transient overtorque : 120 % of nominal motor torque +/- 10 % 60 s
- transmission frame : RTU
- Transmission Rate : 9600 bps or 19200 bps
- type of polarization : No impedance
- UNSPSC Classification v19 : 39122001
- UNSPSC Classification v23 : 39122001
- vibration resistance : 1 gn (f= 13-200 Hz) conforming to EN/IEC 60068-2-8
- vibration resistance : 1.5 mm (f= 3-13 Hz) conforming to IEC 60068-2-6
- Warranty : 18 months
- Width : 12.6 in (320 mm)