An E/P Transducer accepts a proportional voltage signal from an electronic controller and converts it into a proportional pneumatic signal of 0.2 to 1.0 bar to operate pneumatic actuators or reset pneumatic controllers. The RP7517A accepts a 2...10 Vdc
- Maximum Lead Length : 30inch
- Overall Depth : 50.8mm
- Supply Voltage : 24voltage alternating current
- Air Connections Outer Diameter : 6.35mm
- Maximum Transducer Output : 15pounds per square inch; 103kilopascal
- Maximum Transducer Input : 2 - 10 Upto 0.1 mAvoltage direct current; 10voltage direct current
- Nominal High End Pressure : 16 psi @ 11 ( min. )voltage direct current; 16 psi with 18 psi (Main Pressure) @ 12
- Supply Voltage Frequency : 50/60Hz
- Minimum Transducer Output : 21kilopascal; 3pounds per square inch
- Maximum Operating Pressure : 205kilopascal; 30pounds per square inch
- Nominal Low End Pressure : 0.5psi
- Maximum Operating Ambient Temperature : 131degree Fahrenheit; 55degree Celsius
- Minimum Operating Ambient Temperature : 41degree Fahrenheit; 5degree Celsius
- Minimum Transducer Input : 2voltage direct current; 2 - 10 Upto 0.1 mAvoltage direct current
- Overall Height : 92.075mm
- Overall Width : 47.625mm
- Current Draw : 16mA
- Input Voltage : 2 to 10V DC
- Operating temperature Range : 5 to 55°C
- Pressure Range : 0 to 18psi
No Reviews Yet
Write a ReviewWrite a Review
