An E/P Transducer accepts a proportional voltage signal from an electronic controller and converts it into a proportional pneumatic signal of 0.2 to 1.0 bar to operate pneumatic actuators or reset pneumatic controllers. The RP7517A accepts a 2...10 Vdc
- Maximum Lead Length : 30inch
- Overall Depth : 50.8mm
- Air Connections Outer Diameter : 6.35mm
- Brand : Honeywell
- Maximum Transducer Output : 15pounds per square inch; 103kilopascal
- Air Connection Type : Dual Barb-Fitting
- Maximum Transducer Input : 2 - 10voltage direct current; 10voltage direct current
- Nominal High End Pressure : 18pounds per square inch; 125kilopascal
- Minimum Transducer Output : 3pounds per square inch; 21kilopascal
- Maximum Operating Pressure : 205kilopascal; 30pounds per square inch
- For Use With : For Micronik 100
- Transducer Output Type : Pressure
- Nominal Low End Pressure : 0.5psi
- Maximum Operating Ambient Temperature : 55degree Celsius; 131degree Fahrenheit
- Minimum Operating Ambient Temperature : 5degree Celsius; 41degree Fahrenheit
- Minimum Transducer Input : 2voltage direct current; 2 - 10voltage direct current
- Overall Height : 92.075mm
- Overall Width : 61.8998mm
- Includes : 1m Cable
- Mounting Type : DIN Rail
- Current Draw : 16mA
- Input Voltage : 2 to 10V DC
- Operating temperature Range : 5 to 55°C
- Pressure Range : 0 to 18psi
