Non-Spring Return Direct-Coupled Damper Actuator - 5Nm
- Feedback Included : No
- Overall Height : 5.23in
- Minimum Storage Temperature : -30°C
- Supply Voltage : 24V AC
- Spring Return : No
- Minimum Operating Ambient Temperature : -5degree Fahrenheit
- Overall Depth : 62mm
- Angle of Rotation : 95degree
- Overall Width : 66mm
- Includes : Shaft adapter
- Brand : Honeywell
- Maximum Operating Ambient Temperature : 122degree Fahrenheit
- Driving Power Consumption : 5VA
- For Use With : Spyder/Stryker Controller only
- Driving Noise Rating : 35weight decibel relative loudness measured at one meter
- Operating Torque : 5Nm
- Maximum Shaft Diameter : 0.75in round
- Feedback : No Feedback Included
- Control Signal : Floating
- Maximum Storage Temperature : 80°C
- Maximum Operating Humidity : 95percentage humidity non condensing
- Minimum Shaft Diameter : 0.375inch
- Runtime : 95 s
- Actuator Type : Electric
- Minimum Operating Humidity : 5percentage humidity non condensing
- Valve Compatibility : With linkage
- Supply Voltage Frequency : 50/60Hz
- Application : HVAC
- Number of End Switches : 0
- Power Loss Action : Fail-in-place
- Maximum Angle Of Rotation : 95°
- Enclosure Rating : IP20
- Fail-Safe Action : Fail-in-place
- Noise Rating : 35 (db(A) @ 1m)
- Manual Operation Type : Declutch mechanism
- Drive Time : 95 sec
- Certificates and Standards : 89/336/ECC C Tick N314 UL 60730 cUL C22.2 No. 24-93
- Number Of Auxiliary Switches : None
- Electrical Connection Type : 3-prong push pin
- Mounting Type : Direct Coupled
- PNC-Selector : Valve+Actuator
