PowerPacT Q-Frame automatic switches are a disconnect device and can be used to open and close a circuit under normal operating conditions. The automatic switches are similar in construction, use the same accessories, and offer the same connection possibilities as the Q-Frame circuit breaker version. The switches have a factory set, nonadjustable trip point calibrated to protect the molded case switch. The automatic switch can make and break its rated current. For an overload or a short circuit, it must be protected by an upstream device. PowerPacT Q-Frame switches are available in unit mount, I-Line, plug-in, or drawout versions. This switch has lugs on both the line and load sides. This PowerPacT Q, 250A, 3 pole, automatic switch has a short circuit withstand current rating of 10kA at 240VAC. PowerPacT Q automatic switches comply to UL and CSA standards. This unit includes a control wire terminal on the both ends.
- Product or Component Type : Automatic switch
- Device Application : Distribution
- Accessory / separate part type : Control wire ON and OFF end
- Line Rated Current : 225 A
- Poles description : 3P
- Breaking capacity code : B
- Electrical connection : Lugs, load, Lugs, line
- Magnetic tripping current : 4500 A
- Height : 6.47 in (164.34 mm)
- Width : 4.5 in (114.30 mm)
- Depth : 3.93 in (99.82 mm)
- Tightening torque : 247.82 lbf.in (28 N.m) 0.04…0.23 in² (25…150 mm²) (AWG 4...300 kcmil)
- Category : US10DE200023
- Discount Schedule : 0DE2
- GTIN : 785901874126
- Returnability : No
- Country of origin : US
- Unit Type of Package 1 : PCE
- Number of Units in Package 1 : 1
- Package 1 Height : 5.20 in (13.208 cm)
- Package 1 Width : 5.60 in (14.224 cm)
- Package 1 Length : 8.80 in (22.352 cm)
- Package 1 Weight : 4.73 lb(US) (2.145 kg)
- Warranty : 18 months