Pipe Temperature Sensor | The STP300 is an electronic immersion temperature transmitter that converts a measured temperature into an electronic current signal of 4 … 20 mA. The STP300 is designed for immersion mounting in pipe systems with a separate pocket/well (see page 18 for ordering information). The pocket/well is sealed, making it easy to replace the transmitter if necessary.The transmitter is intended for measurement of high and low temperatures. The transmitter is connected with a 2-wire cable, which serves both as power supply and for signal transmission. The reading of the measured signal is done over an external load resistance. | Output : 2-wire, 4 … 20 mA | Range : 0 … 100 °C, 0 … 160 °C, -50 … 50 °C. | Accuracy : ±0.4% of range | Supply : 15 … 36 Vdc
- Application : Pipe Immersion~~
- Brand : Schneider Electric
- By Schneider : Yes
- Color : Black and green
- Depth : 1.8 in (45 mm)
- Diameter : Probe 0.2 in (6 mm)
- End of commercialization annoucement date : 05/15/2025
- End of commercialization date : 08/15/2025
- Final Result for Connectable : Not connectable
- Final Result for Flywheel performance tracking : Non Flywheel
- Height : 2.6 in (66 mm)
- Indivisible Sale Qty : 1
- IP Degree of Protection : IP65
- Location : Plant Room
- Manufacturer : Schneider Electric
- Material : Polyamide: enclosure
- Measurement Accuracy : 0...100 °C +/- 0.3 °C
- Measurement Range : - 10...150 °C
- Output Type : Analog
- Packaging made with recycled cardboard : No
- Packaging without single use plastic : No
- Product Certifications : CE
- Product Or Component Type : Sensor
- Sensor Type : Temperature Transmitter Temperature
- Take-back : No
- Type Of Measurement : Temperature
- Width : 3.3 in (85 mm)
