U001-0010

Tee Meter, Brass Flow Sensor: 1" Cast Brass Tee Metal tee-style liquid flow sensor with cast bronze housing fits 1/2" to 1.5" NPT. These sensors are accurate, even at low flow rates. Use in conjunction with a Veris flow monitor or transmitter for a complete flow monitoring system.APPLICATIONS Measuring liquid flow rates Accounting for total accumulated flow Features PPS electronics housing...highly durable Six-bladed impeller design with a proprietary, non-magnetic sensing mechanism...high accuracy and repeatability Forward-swept impeller is less prone to fouling by water-borne debris...reliable performance with minimal downtime Operation and repeatability even at low flow rates Signal can travel up to 2000 ft (609m) between the sensor and the display unit without the need for amplification Supplied with 20 ft (6m) of 2-conductor AWG 20 UL type PTLC cable (105ºC rated) Sensors of similar type are interchangeable, so there is no need for recalibration after servicing or replacement...quick install and fast maintenance Series Specifications Maximum Pressure At 38ºC (100ºF) 400psi; At 105ºC (221ºF) 325psi Wetted Materials UHMW-PE bearing, polyamide impeller, tungsten carbide shaft, EPDM O-rings Recommended Flow 0.3 to 15 ft/sec (0.09 to 4.5m/sec) Accuracy +/-1.0% of rate Repeatability +/-0.7% over recommended design flow range* Linearity +/-0.7% over recommended design flow range* Rangeability 60:1 Transducer Excitation Quiescent current 600uA@8VDC to 35VDC max.; Quiescent voltage (Vh)=Vsupply - (600mA*Zsupply); On-State (Vlow) Max 1.2VDC@40mA current limit(15 ?+0.7VDC Output Frequency 0.8 to 80 Hz * =10 upstream and =5 downstream straight pipe diameters, uninterrupted flow.